Thanks, JC. The 2X4's are 1 across: 4" across, 2" down. The printhead failures can be anywhere on the printhead, not just the middle. Actually, they have yet to fail in the center... mostly to...
Type: Posts; User: Jeff M.
Thanks, JC. The 2X4's are 1 across: 4" across, 2" down. The printhead failures can be anywhere on the printhead, not just the middle. Actually, they have yet to fail in the center... mostly to...
Hi JC. I appreciate your reply. We have been supporting the Zebra printers for about 5 or 6 years, but only occasionally, so it's not a large part of our business, although I would like to do more....
The KM-4050 is in a church day-care center, so I don't think security is a high priority here. I haven't been able to get back there (the office manager was on vacation), that's the reason for my...
Hi all.
I've got a customer who prints over 20,000 labels per day. Currently, they're using the Zebra ZT610s. They were using the Zebra ZT410s, but were going through printheads every few...
Hi all: Thanks for your replies. Well, I went back yesterday to continue with the M2035 issue, and... it was working! ??? I didn't reboot the computer after changing the SMB setting in the...
Hi all.
I sell Kyocera, and I usually set up SMB scan when the customer wants scanning. Most times it works fine, a few times Kaspersky or McAfee blocks it but can get around that. It seems...
I was finally able to get back to the customer today, and yes.... the solenoid was sticking, and that seemed to fix the problem. THANK YOU! I still don't know why the internal prints worked, but...
Dickie: With all due respect, I didn't say I wouldn't look at the solenoid. I've actually run into this on a lot of HPs and Kyoceras, so I know it's a common issue. And I said I was going back to...
I did get it, and my apologies for taking so long to respond. Thanks, Phil B. and theengel for your responses. I did check for and paper or buildup of toner inside, and it's actually pretty clean. ...
Hi all.
I got a call on this problem today. When you try to print or copy, it gives a 32 error in the display. Past threads have indicated it might be a dirty transfer belt sensor. Funny thing...
I'll do that.
Thanks.
Jeff M.
Hi all.
I got a call on this problem today. Funny thing is, it will print an internal print (user setting list, etc) no problem, but when you copy or print, it gives the 32 error. So that would...
Thanks, teckat! It's truly appreciated. Jeff M.
Hi. This is my first foray into Canon's wide format machines. I've been servicing HP Designjets for many years but this is the first Canon I've seen. A new customer called about this one, so I...
Update: Sure enough, the motor failed again. We replaced it, and all is well. I sincerely appreciate your responses. Merry Christmas to everyone! Jeff M.
That was my thought. I'm ordering one to have, because I'm sure I'll need it soon. They don't fix themselves, so it's only a matter of time.
Thanks again for the responses. Jeff M.
I switched tray 3 and 4 lift motors, and now both are working fine...... ??? No noise, fill both trays up and they lift smoothly. I'm sure it will happen again, but to which tray? To be...
Thanks, Kyo fan. I'll check it out later today. I looked for torn paper when I was there last time (although I didn't remove the trays) but I don't think there is anything stopping it from lifting,...
I have a 4501i with 300K on it with a PF-740(B) LCT. When you fill tray 3 (the right hand one) over half full, you can hear it straining to lift and then kicks it out, saying tray 3 cannot be used...
Any luck with finding an AK-730 kit? I bought a used 3500i with a finisher, and some of the pieces are broken. I was able to get most of what I need from the wholesaler, but I need the right hand...
Thanks, slimslob. I'll try this. Appreciate your response. Jeff M.
I have an MP-301 with a really odd problem. At the customer's office, it will not pick up an IP address by DHCP, nor will it allow a specific assigned address to be recognized on the network. I...
FYI: Had this same problem on a machine with 19K, saying toner low after only a few copies. Customer called, saying green toner release lever was broken, and machine was calling for toner. ...
Looking for a CIS for the BizHub C25, #A2YFPP1100. According to ACM, cannot get scanner alone, only with complete top... over $400. Anyone have one or a junker they will sell the CIS from? Thanks....
Thanks, appreciate the response. I didn't think of ACM. I'll try them first.