Finally got this machine to feed paper square after new tires in the tray and doc feeder. It works great except....
after you make your copies it wants to feed a new sheet of paper up into the...
Type: Posts; User: Ricky965
Finally got this machine to feed paper square after new tires in the tray and doc feeder. It works great except....
after you make your copies it wants to feed a new sheet of paper up into the...
Waste Toner full. Which unit do I need to order, developer or drum?
I know some units you can empty the waste toner but I don't see one on this one.
I have a copier that has a too often error F375 after a fax and sometimes won't receive a FAX. I reset the machine a month ago in an attempt to fix it.
However, I believe it needs a firmware upgrade...
Paper runs through the doc feeder but nothing else when I try to copy. Get this error F33C
Will print the menu map etc. It's when you make a copy it gives the error.
Pulled the fax card but it...
It's not the tray as I've tried another. Paper starts out but it seems the next roller is not turning as it doesn't begin it's upward path
We have one of those. The ethernet quit on it's own and other little things. Upgraded the firmware and it restored everything. working ok now. Might try that,.
****######***$$$@@@@ bad replacement feed roller clutch. The original failed and the replacement apparently was slipping on the shaft. Replaced it with the one from the other machine and problem...
made 400 through multipath without a jam. Loaded thicker paper in tray 1 and it is not jamming as often. Will look further.
Had cleaned sensors with air and then cloth. Ran 350 copies through the MP tray without a jam. Can't make 5 below without a jam. sometimes a few more. Replaced both rollers in feed tray pickup. Gear...
Customers MC361 gets a 380 paper jam over and over. Replaced the bottom feed rollers and made sure the transfer belt is seated and locked. Can't find anything in the paper path. paper always makes...
Replaced all the toners in the machine. All colors have streaks in them. Ordered a new transfer belt as it has streaks in it. This was not a good investment. Glad I have a larger color Ricoh ij the...
Displays Processing Data light at turn on. No noise. Any ideas on this little thing. I don't have a service manual on this model
Have one of these. Displaying Processing Data/Error light.
Using Netviewer I see no software loaded for the FAX. Machine still copies and prints, returning it to the customer.
Thanks
Must be the main board. USB drive not recognized in the slot and it looks ok when I inspected it. Pretty sure they never used it. Oh well, time for a new machined. Thanks for all the ideas
I have all the firmware versions after I looked on my other PC, I believe the USB is disabled. It won't update firmware and Nothing will find the printer from a USB cord
I must have other...
It is a Kyocera M2535dn. The FAX option disappeared on it's on. It doesn't show in the setup or service modes. Was sent another card under warranty but it doesn't find it either.
The I/F is...
I have a machine that doesn't recognize the Fax Board. Tried another board and it didn't see it either. Any one help or do I need to update the firmware
we normally use this Ricoh for office use but just happened to run out of toner on the Lexmark color and discovered it won't be in until wednesday. We were just trying to get it done ahead of time....
The labels are Avery 5520 Weatherproof address labels. It says laser on the box. Tried various settings on the bypass. Sometimes it will print 2 sometimes 1. Found a lock lever down on the fuser but...
Having to print color labels for a customer and the Label paper doesn't always exit. It is fused but doesn't exit. Occasionally it will exit ok
Tried Special Paper and Thick Paper but it doesn't...
Cleaned her up and it works flawlessly. Just didn't have time to get to it before. Many thanks
I plan on taking it apart again and double checking. I cleaned it some time back but it didn't clear up. We set it aside here in the shop as it was a shop machine. Pulled it out today to look at it...
3915139150All printed copies, configuration etc are perfect. When I place a copy on the doc feeder the output has lines of orange and reddish color that are straight but at an angle to the paper and...
I have the service manual. reset won't clear it. I believe it's a hard drive issue. Anyone help?