There is a bulletin on this.
Type: Posts; User: seansbar
There is a bulletin on this.
Have you received a 3528a yet? I’m hearing estimates from August to October. Being told by sales they cannot order the current models but the new ones are months away.
Good thing all the...
Try holding the sleep button while power on. That is in the manual for when replacing the memory or system board.
Otherwise, I’d say your new ram chip is not 4GB or is bad.
Hi. I have a Riso duplicator with the card feed kit option (S-3451). Cannot locate a parts list. Anyone one have one?
I especially need the separate roll and the little pad that is right next to...
In my area, a new customer, about a month ago, got several of these machines, mostly 5518a.
They routinely scan 100+ page jobs. Several C260 errors, maybe not any C553, at least not the machine I...
I had a 3515a with same issue, turns out the frame was bent and the image unit was not seating far enough into the machine to engage the coupling.
The customer complaint was about the dirty image...
I have had this 3 times on some xx05ac. Both times it was the system board. Same symptoms with the boot cycle. Weird on your issue.
that was the fix for the gears wearing out. Now everything is a mess. Gear grease, belt oil, all over everywhere. I have found if the belt is beyond PM life, then the fuser rollers start binding....
When I read the original post, I had a flash back, but the school I was at had two 8508a.
It sure seems like the C471 code is on the rise and each time the thermostat is open circuit. There is a...
It right there: model 5
Haha, history? Since my company updated software in June, the techs can no longer look at history. There is not even a button in the app for it. It’s been 23 weeks since upgrade and still don’t...
Faxes are not secure, I don’t care who or what law says. How many times have any one of us gone to a machine to see incoming faxes still on the trays, or even fallen behind the machine?
I agree of...
I don’t know much about how the machines get into cloud connect, but to use it:
the web address is: Log On
Use the email address associated with your FYI account for username and use your FYI...
That was a tough one to find, but I would guess 6LB43055000
Why do you say that? I’ve found these units to be pretty good in the field.
For what it is worth, I have replaced dozens or printheads on Colorqube that have leaked. Many have looked just like the pictures posted. There was a xerox procedure to seals up printheads, but my...
yeah, I made the same mistake. Thought a period would fix it, but it did not :rolleyes:
Sure does. Put PDF on a USB flash drive, put in USB port on an eBN. Press [Print] on the Home screen on the touch panel. Select [USB] from the drop down menu. Select proper file and settings and...
Actually, in my opinion that is not too bad. But if your customer is picky, I would start by replacing all 4 charge grids, they get covered in ozone residue so fast. I would also double check the...
Wow, you got some patience. I only give it one tr,y on a good day
The green dots are because it’s looking to connect to PaperCut server. Reference my earlier post.
Ah, I see that screen a lot on my rounds.
You have a machine that has PaperCut Embedded installed. Formatting the harddrive will not full remove the software. There are 08 codes that were set...
How do you install these frustrating fuser sleeves?
from another thread:
I've tried a few ways, including above, but its just messy. There is probably no way to eliminate the mess, but there...
I have noticed that the 6 series does take long to boot. Sometimes, a hard drive format and reinstall software may help, but not too sure on this, may be it only fells faster, cause I want it to be...
Yeah, an error message would help.
I've seen 3rd party software, such as PaperCut, change the service passwords. But it usually makes them blank.