Search:

Latest Goose's guide dated June 2016. Don't have unzip utility? Get 7zip free HERE. Don't have excel? Get Libreoffice free HERE. You're welcome.

31283

There's a bulletin about lubing the worm gear on those web motors also an updated part for said motor AX040187. I would take a new web assembly with lubed motor and swap the whole thing out along...

2958629587Try entering data for another c430, location of birth certificate is on top door for toner behind the toner instruction label. Should get you close. Have had to do this before.

And you have tried 2-111 "c" and "a" as suggested earlier in the service mode? Gotta have clean belt image density sensors

Sounds like it might could be clutch staying on causing stream feeding. Check the clutch signal to a working tray with same paper size/weight then compare to bad one. If clutch is staying on look...

Don't those have the birth certificate on the inside of the rear or side covers?

Heard a new one today:
Did you hear about the baby boy who was born without eyelids? Well they decided to use his circumcised foreskin to give him eyelids. The surgeon who conducted the operation...

Use SP 5832 001 to format hdd after its installed

IDE hard drive (as opposed to sata hdd) needed for duplex. I assume it stores the scanned images to print the pages in the right order which is the second side first so that they can be stacked in...

Firmware. It's always firmware... and maybe an hdd wipe and some soft switches

A bridge with a usb for printer? Or if its like a ricoh that will allow printing through usb and lan simultaneously?

Have seen a C5501 fuser do a million clicks with some noise from the bearings but still. Toner pumps go out more often. Usual black and color drum units will need replacing. In my experience any...

Always wondered what makes those pins lock one way. Had my theory confirmed. Ever looked inside a magnetic torque limiter?

My company uses a software called merlin but there are many others that utilize SNMP to gather device info like counters, toner and paper levels etc...

probably a broken tray lift spring holder...

is that the dreaded sc202?

if you have a fiery or maybe one of your customers they usually come with a nice set of grayscales. if i remember right the older fierys had an actual kodak greyscale and the newer ones have a...

i had been wanting to try the backpack toolkit. don't need my laptop since i'm not doing network calls that much anymore. nice to have your hands free for all the parts i have to carry in especially...

I've had a similar issues that were fixed by formatting the hdd and clearing the printer memory. 5832.005 to format printer hdd. 5832.001 to reset all hdd if that doesn't work but you will lose...

We usually just program buttons for frequently used fax numbers with the 9 included for convenience. Most don't need a pause after the 9 anymore. If they are dialing a new fax number we ask the end...

A few things that have helped me are:
ask end users questions to define problems,
Read the manuals! (Usually expressed as "RTFM!" around here for obvious reasons)
try the simplest solutions...

How much is it worth to you bud? Lol

Agree with zaxxon. from experience these turds usually go light with old developer. Dark copies probably caused by grid/charge or dev bias or even a bad brush roller. Did u put the development...

Also at initial firmware update screen there are 2 buttons on lower right of screen. On one of these you have to set model code. There is a video on official km website. This might be what you are...