Plug it in, turn it on, load it with paper and toner, then copy till your heart's content.
Type: Posts; User: Ollie1981
Plug it in, turn it on, load it with paper and toner, then copy till your heart's content.
Assuming it's the "EX" version with the scanner and document feeder, it'll boot up and work as a copier without the Fiery, you can enter SP modes via the usual way. If it's just the proc651 printer,...
Just throwing my 2 cents in....
If you get an issue where this model will not go through the paper load procedure, I.e you push the lead edge into the feed unit and you feel like the machine grab...
There should be a black, L-shaped stack height arm that rests on the shift output tray.
If that is out of it's bracket or missing completely the tray will drive all the way down until the motor...
One thing I've done many times in the past to fault-find this is remove the intermediate cylinder (where the stupidly long transport coil from the toner bank ends and the toner is air-pumped from to...
To be honest, even with the Fiery you'll struggle. The problem is, being a toner based business colour device, the gamut of colours this machine can produce is nowhere near what a professional photo...
A 350, not seen one of these in a few years. The df is pretty much the same as what you get on the 2090/2110 and MP9000/1100/1350. When I've had problems like this I've basically blasted all the...
Are you their I.T guy as well as their copier tech? Damn, you didn't half go to some lengths to resolve an issue that they created in the first place, hope they were paying for that time, but the...
Honestly bud if you think fixing a copier is better than an orgasm then you are doing orgasms wrong.
And if you are a dude, it's almost impossible to get orgasms wrong, unless you are into some...
In Soviet Russia.. Gas burn you!
Yes there is an MP7500, it's the Martini c3 in the same model range as the MP5500 and MP6500. The MP7000 and MP7502 are basically later versions of it with very few differences to the engine.
The...
Yeah, we've got the GPS trackers coming soon too, although I think we'll be tracked via our PDAs (as they already have a GPS unit in them) rather than a vehicle installed unit.
We've had the...
Years ago there was a "get what you need to get done but don't take the piss" policy that seemed to work quite well.
But then a global financial crisis happened, several mergers happened, lots of...
Worst place ever is back in the day when I used to repair home appliances. I have a few horror stories about some of the filthy squalid pits I had the misfortune to visit but one always sticks in my...
Or transport the celebrity crush of your choice into your bedroom sans clothes (even despite the multiple restraining orders).
Sure
*waves magic wand*
....there you go!
A good friend of mine who I went to school with had a wife who turned out to be a lesbian.... funnily enough she isn't his wife anymore on account of the whole "being male" thing he has going on.
...
We are not asking you to send us scans of your sensitive documents - help us help you!
Can you not just scan something that isn't sensitive in order to provide a sample? Even just taking a piece...
This model I find a little bit more complicated than the MPC3500/4500 although they are very similar. I always take the rubber hose off the back of the toner hopper to vac the pipe clear when...
A few years back I left my phone at a customers, I got about 2-3 miles down the road, realised it was missing so turned around and went back to the customers.
When I was eventually reunited with...
If I remember the gear is listed on the same page in the parts catalogue as the drive unit (they are part of that big main drive gearbox) but luckily you can actually change them by going in through...
Wow, an 850, not seen one of them in quite a few years.
Vac out the toner supply pipes that run from the intermediate tank up to the dev unit via the attraction pump, also vac out the toner...
Before you judge a man walk a mile in his shoes....
...because then when you come to judge him, you'll be a mile away and have his shoes.
Going to need a bit more information to go on if I'm going to be able to help you.
What driver are you using? PCL5/PCL6/Postscript?
Is it the correct driver for this machine or are you using...
Clean the mag roller, replace the dev. You probably won't even have to touch anything in the drum unit but if you want a belt and braces approach, clean the charge roller and vac off the cleaning...