I have been disassembling them and cleaning old grease off of heating element and re-coating with new thermal grease. So far it seems to have worked.
Type: Posts; User: DavidEtling
I have been disassembling them and cleaning old grease off of heating element and re-coating with new thermal grease. So far it seems to have worked.
Can't seem to attach it here. Email me directly and I can get it to you! daveetling@williamsoffice.com
From Service Manual
6C
Heater temperature exceeds the maximum
high temperature.
(270°C or more is detected for 1 sec.)
• Thermistor ASSY
• Power supply PCB
We know, Sharp doesn't have any left. That's why I'm posting here looking for one!
Thanks for the response.
I would like to purchase either of these options for one of my customers!
Thanks!
Looking for a Sharp MX-NBX2 or MX-NBX3 option. Would prefer new. Thanks.
1. Open front cover.
2. Press the [Clear/Back] key.
The Replace Drum 1. Yes 2. No appears on the LCD
3. Press the [1] key.
The drum life counter is reset, and the machine returns to the...
Had a quarter horse too. Darn cord kept coming out of the plug though!
Send me your email address and I'll send you the ones I have that you need. Daveetling@williamsoffice.com
Check your email please!
The guy inside the Lost in Space robot just passed away earlier this year!
Robbie was actually in a Lost in Space episode with the LiS robot!
Problem is laser unit. You may be able to disassemble, clean and lubricate the polygon motor and get it going. Haven't had great success with the Lexmarks doing this, but might get you going! ...
Have seen nothing but trouble with aftermarkets, especially Premier. Between them and the 50ND toner cartridges, they cause me a lot of service calls for bad print.
Manual says it's a tray 2 lifting motor! Page 290 of service manual.
I need a Brother GX-6000 clutch assembly (U11282001) is anyone has one lying around! Thanks.
Have one that is grinding when it kicks into high speed. Think it's main drive because sound is coming from right side. Book doesn't show drive unit with a part number. Any ideas? Thanks, David
Here's what the Service Manual Says:
Error code 32
Print Unable 32
Turn the power off and then back on again.
Density sensor shutter performance malfunction
User Check
- Check if there is a...
email me at daveetling@williamsoffice.com and I'll send it to you!
The part number is LE2949001 and the retail price for the unit from Brother is $70.64.
1. Turn on the power switch of the printer while pressing the printer control panel button
2. Release the panel button when the Drum LED comes on.
3. PRess the panel button again and release it...
The part number for the gear is UL8923001 - FU Drive Gear 20/38 and the number for the bushing is UL8908001 - HR Bearing 25. Hope this helps you out.
Have had several of these. Replace the main board.
Also check out Feedroller: hp feed rollers, printer parts, hp rollers , feed roller repair kits, feed roller parts, laser jet rollers, separation rollers, hp feed rollers, pick up roller, mp roller,...
Also make sure the picker fingers aren't broken, will cause continual paper jams.