Search:

thanks dear:
machine not hanging on hourglass ? but its stay around 20 secound and turn off and on again?
i copy fiels from another working CF card . to the old one ? but same broblem

other...

Hi Friends:

i have this machine its n0t showing any thing on lcd panel . only the bar galss hanging .
haw can make update the firmware ?? i cannot open service mode

thanks friends

Hi every one:
I have the Panasonic DP-3530 machine , when copying the paper stop before entering to ADU and show J17 jaming error?
I try to replace the photo sensor 1,but same problem ?

how can...

dears:

the machine is printing well?

but only i cannot use the completed job from comand work station?? its means if i open comand work station folder then right click on the job?? this action...

Hi every one:
How can activate reprint jobs on commond work station with fiery IC305 in bizhub C6501 >

now all the job has finishe i cannot controll it ? like when i need to print this job agai i...

:rolleyes:thank you that is it???????????????/

thank you dear . but its under counter data-parts counter- special parts????

please help me :
how can reset the counter for toner filter ?? and where is this filter in machine??
Thanks forr all:cool:

i already turn the machine of and on many times but sama problem??

during printing i get this code c-2861 , and the machine stop immedetly???
how can reset this problem??
thanks for all

i inter to service mode>f9>Ram initializing> all jobs clear.
but same.

is there any way to know what this error , and code number?

its ok ,but why the spanner apear without any error?
and how can configure the error code number?

i have dp-1820 panasonic its show the spanner red with out any error code and also the paper tray empty mesage ?
i try to initializing the ram but still same? the paper is full in cassette but...

Thanks for all.
i will try this when i visit my machine

i have this machine Canon np 6130 . it show error E000?
how can reset this error and how can iter to the service mode. becouse i press the switch in the rear left site and the jaming ,erroe,LED...

the machine toshiba BD4550 show erroe code CP ?.
how can resolve this problem
best regards

how can i print in Pb (perfect binding) in one side from PDF file
thank you
best regards
gamal mehdar

how can download the fonts to print controller IC305 . which connect to bizhub pro C6501.


thanks for all:cool:

but how can reset and resolve this problem

i have bizhub 920 and its show me the error C41-01.
how can reset this error and reslove te problem
thanks

in the Ricoh jp-5000 duplecator i think there are no pattery on the board.
but wreten on the eeprom IC
M48T58Y
its with battery.
can you check please

is the battery inside the eeprom IC .
i didnt get any other battery on the board .
what do you think the pins which shuld be connect the external battery on the IC.
thank you very much...

the problem with this machine is the language in the lcd panel change to japanes after shutdown the machine and stay about 5-10 minutes .
i retern it to english but after shut down its retern again...

thanks for all
yes that is the software switch its the problem
now its ok

the dip-sw 35-1 put it 1 and after that you can go to aplication - image adjust-you will get the new window for the size appear(check it before is it no)- then chose the custom size for the length...