when you open the front door, there are 3 drawers. the first is the developer-drum drawer. the second is the IBT assembly drawer, and the third (with a green lever) is the registration-2ndBTR-fuser...
Type: Posts; User: TechMate
when you open the front door, there are 3 drawers. the first is the developer-drum drawer. the second is the IBT assembly drawer, and the third (with a green lever) is the registration-2ndBTR-fuser...
Google search or you can find a copy of the user's manual on the xerox website. The IDE interface cable is available from xerox or an authorised dealer as this is not a normal IDE cable. As for the...
Reload the latest firmware. This will reset the machine's internal settings to default.
Most Fiery EX2000 I worked on runs on WindowsXP. There might be DLL compatibility issues with WinNT4.
The outcome of the calibrated machine will still be dependent on the RIPs setting and calibration. That's where the profile is being read from and relayed to the machine. No two RIPs have the same...
Not a good idea :)
you need to adjust the fold position of the booklet maker using PWS depending on the number of sheets being folded.
Your dcIIc3300 is an office multi-function printer which means it is not designed to hold full bleed printing on thicker stocks. most xerox models are rated to run up to 260gsm including the DC125x...
You can't, however a FUJIXEROX Apeosport/ Docucentre (Austral-Asia model counterpart) which is the equivalent of a Work Center (WC) series has a Korean language option
you need to obtain and re-enter the original scanning software key documentation that came with the machine.
Enable SMB & FTP ports on the xerox machine whichever is applicable
The iso file you're referring is a part of the system software installer files. The ps files are patches. it would be best to re-install the system software- in that way you will know if the hard...
Your server might require scan authentication. Consult your IT administrator
As indicated, you need to configure your system domain name. also, your email server might need SMTP authentication. therefore, you will need to consult with a xerox tech with IT connectivity...
Replace the cutter motor. You might also need to reload FW. Otherwise, the controller board might be faulty
Possible NVM corruption, faulty RAM and/ or ESS bd, or a faulty MCU bd.
I believe you are referring to the COLLATE function and STORED PROGRAMMING. Both of which are found in the user's manual.
Do both machines use the same RIP (ie. Fiery)? If not then you can't really compare.
FW reload- this may help.
Have you done the registration alignment using the PWS? You also need to check the condition of the inverter assembly- inverter motor and spring tensions on the inverter paper path rollers. If you...
It's a machine to rip connectivity problem. Check if the board or a cable maybe faulty. If hardware connectivity is Ok, then reloading the system software of the CREO spire might be the next step.
Though they maybe similar in engine configuration and moving parts, the PCB's and firmware levels are unique to each model. Therefore it can not be converted.
The problem was solved.
Remove the ROS assembly and clean it (not just the ROS window). You also need to change parts you mentioned to a NEW one (not interchanged from a working machine) and scan a sample as suggested...
You may need to reload the firmware of this model. thanks