Yeh done all that still. Comes in from time to time
Have about 50 of this model in the field
Never happens on some of them weird !!
Thanks for your reply.
Type: Posts; User: kopikat
Yeh done all that still. Comes in from time to time
Have about 50 of this model in the field
Never happens on some of them weird !!
Thanks for your reply.
Hi all getting sc 544 intermittently on this copier its had a new fuser since the problem started.
Ih coil and inverter have also been changed any ideas.
Many thanks.
Eamo.
Hi all,
I know if you have a few of this model you have come across this error.
Word from ricoh is replace thermistors, upgrade firmware, try the new brackets,
Anyone
(same as old, well...
thanks for that but i think i'll be o.k i'm fixing these things for 20 years.
i have had the problem with faint lines on these models and tried to clean the doctor blade with a bit of card and moved the position of these faint lines by doing so, then i changed the dev and...
BTW part no for touch screen b2239900
eamon
first off all he needs to change the outter touch screen i have had a load of these going faulty ,they cost under a euro.then you can replace the sensors (to the left of the fuser as you look in from...
i hav'nt realy processed all that sub scan blah blah . But i have hade very simular problems and the problem has been solved by dev changes. use single colour mode and do a sky shot in each colour...
have' had the prob on mpc but have had it on mp 2050 and the cause has been if you switch auto paper detect off
and the sensor behind the tray gets knocked out it changes the pressure of the tray...
that worked thanks
ta i'll check that on monday
log in as supervisor is the correct answer i had the problem before on a mp 5500
hi all,
had to change a nv ram on mpc 4000 uploaded and down loaded data from old to new
when re-booted scanner option was gone even in user tools, try a second new one with
the same result any...
i had that blue gear go as well
hi all
first week back, schools not back yet but what a week,
3 ricoh mpc 6000 causing major probs and had to swap a
nv ram on a mpc 4000 and the scanning function has disapeared
any...