No I am not a certified tech...I have changed firmware number of times so HDD firmware installing is not a problem... Actually the registration clutch of the machine is not working while checking the...
Type: Posts; User: abkonnet
No I am not a certified tech...I have changed firmware number of times so HDD firmware installing is not a problem... Actually the registration clutch of the machine is not working while checking the...
Some body have any idea for rectifying this problem
Face the error code issue 733-0001..
Format the HDD and re install firmware.. machine turns on everything seems ok ... after turn off and turn on the machine during boot time machine get restarted...
Problem solved there is a dry solder in relay RL1 in AC Driver pcb which doesn't give proper power .
When the error appears and i turn on the machine the machine starts normally... but the heating lamp is not turning ON
neutral to ground is 2.8 volt
IR 8070 Shows Error 004 subcode 001 and the machine heater lamp does not turn on properly some times it turn on some time it is not..
Hi there is no jam code i have attached the picture.
There is no jam code the jam code is blank301063010730108
Hi in my Ir 8070 Paper jam happen while in two side printing... I have attached the photo of the jam... Can anyone fingure out what makes this paper jam... I am unable to find the cause. The...
I dont use this machine for a while. After turning On the Machine and make a print out the Image margin is appeared in Cross. I checked in both A4 and A4R margin is crossed in both the print. How to...
When i give print to IR8070 shows processing and the print is not starting, when i cancel the print the machine simply hangs, some time shows the error E315
If there is crack in the fixing roller, then there will be no room for shutter to rotate. the error will be 840,Shutter motor rotating error. Pls note it if i remove the fixing motor and keep a side...
The problem is if remove the motor and turn on the machine, Now there is no load to motor, after some 2 mins the error code 14 appears because the motor doesn't rotating.
CanonSco i unable to under stand what u mean?
Error is 14, I know the motor is the Problem is there any way to rework the motor PCB.
Hi any body knows how to service the Fixing roller Motor of IR6570, Because it get fault very soon every time replacing the motor is expensive, This was the second motor which gone in 3 Months, The...
The problem is with the connector behind the fixing roller, the pin is bended so it doesn't have a firm contact corrected the pin, now its working.
teckat thanks for the reply, i first remove the clutch and apply 12v separately it works, then i remove the registration assembly and keep it a side then turn on the machine (connecting the connector...
The registration clutch does not turning ON, No voltage coming to the Clutch, The clutch is good. How to rectify it.
Thanks u all guys....for your kind support. Cleaned the registration clutch faces with mild soap. problem solved, checked by taking a 1000 copies No jam.
mramlawi thanks for the reply , changes the corona wires it happens in all the copies.
Hi i have attach the paper that jams. The paper get folded in the Registration assembly and passes through the fixing unit and jams. Cleaned the registration assembly and clutch also lubricated....
Jam Code 0237
02-Stationary jam
37-Bin1 Delivery Sensor via reversal delivery.
While Tooking Single side Copies with the Finisher Option in Ir400 The first paper comes out normally and the second paper Not going in the Reverser it comes out in delivery Stoped and indicates a...