Thanks for the replies
i installed the watermark firmware
sim 62 1 result NG
hard disk I bought it with the same code as the original in a **** n
54903
Type: Posts; User: monkees
Thanks for the replies
i installed the watermark firmware
sim 62 1 result NG
hard disk I bought it with the same code as the original in a **** n
54903
Hy guys
I replaced an original ( sharp ) hdd with a compatible (with the same characteristics) one with the same features but it gives me an error code
it is possible to install a non original...
42735
I have replace sensor , Check the cable
Do you have any Other casistics?
thanks
I replaced the full ptr :cool:;)
Few, I find them all out
It seems like a synchronicism problem
40875
Hey guys any idea ?
Stapler is new
Vibrating plate assy new
firmware updated
thank you for the answers
Google translate ;)
Good job
You read Technical Bulletin for 471 - xx ?
If you don't find him, I ll send it to you in Italian :D
I lubricate the closing movement transfert
I solved thanks
Also in Italy we read the manuals ;);););)
Completely dismantled the PTR
I found under the cleaning roller a clip :mad::mad::mad::mad:
Maybe you haven't read it right:D
I wrote that I changed already opposite roller and the kit where there is the other roller
Hi guys
I have this code sc 460-01
already replaced flat belt transfert - opposite roller - kit 600 k - kit 1200
run SP 2 234 002
have you had similar cases ?
disassemble and clean well all the fan ducts
replace all filters
Developer how many prints produced?
I had a problem with word that I printed all the pages I resolved by changing
USER TOOLS
PRINTER FEATURES
SYSTEM
You tried to edit the paper parameters ? service maual troubleshooting j032
• (SP 2-813-001 - 100: Coef corr front edge : the second Custom Paper 001 - 100
• (SP 2-814-001 - 100: Switch corr...
On PRO 907 to me had happened with cut cords of the synchronization engine
problems you listed we had cases on other machines
with the problem J031 I have to go see her for the second time with...
Thanks for the replies
the problems I see are the same
I have a big problem with j031, even after replacing the transfer, and sheltered together with the specialist, you cannot solve :mad:
...
KenB The Monkees they were famous when I was born - I like the sixties music ;)
PRO 8100 On the site Ricoh there are 14 pages of technical information :mad::mad:
great copy works has big...
Hey guys ! I have pro 8100 in assistance
have many problems with paper jams, strange codes, jam sorter ecc
this is terrible machine ? ;););)
I regret the PRO907 ;););)
I moved the sorter and moved the problem .
I try to disassemble the stepper motor Staple Tray 3
Yes sensor cleaning all
the problem is with Stapling and 20/30 pages with a few stapled sheets no
Hello guys !
I have this sorter SR 5000 JAM in J 114 Jogger
Sensor all cleaning
Replace 3 stepper motor B8305573
do you have any idea?
Thank you for aswer ;)
ordered !
just replace
I have this problem motor web not work
action:
reset counter PM sp 1 902 web ecc
motor web new
sp 5 804 web motor control
hello guys
you can manually change the td sensor?
x problems faded prints with 64% residual image unit k
I have already changed 2 image unit same problem
customers mainly printing...