From: unixguide.net
"init: Id "x" respawning too fast: disabled for 5 minutes."
"init: Id "x" respawning too fast: disabled for 5 minutes."
In most distributions this means that the system is...
Type: Posts; User: Rune
From: unixguide.net
"init: Id "x" respawning too fast: disabled for 5 minutes."
"init: Id "x" respawning too fast: disabled for 5 minutes."
In most distributions this means that the system is...
What version is the firmware you are using ?
KM-3035_4035_5035_BAM_MAIN_2FGS1015S_MMI_2FGS2015L_Language_2FG29347K
KM-3035_4035_5035_MAIN_2FGS1015S_MMI_2FGS2030E_Language_2FG29347K
I...
Hi
In Europe we have a spacial firmware, so we can save the username and password for SMB scan The machine is branded FS-1118MFP and version i s S2GM2012E06001
We will try to format the harddisk.
Do you make a backup of the settings in U917
Format the disk in U024, and restore the settings in U917 again ?
The customer has not complained over CFxxx...
KM-4050, KM-5050 Falcon 3
We have some customers with Falcon3 machines, who have a problem that the machine is slowing down in reaction speed then the machine has being runing for about a week...
Colorlaser:
FS-5800C Supplys
370PE0KL TD80K: Black toner-kit, ca. 12.000 pages ved 5% toner cov.
370PE5KL TD80C: Cyan toner-kit, ca. 10.000 pages ved 5% toner cov.
370PE4KL TD80M: Magenta...
Kyocera Mita
B/W - Toner
Printer: Part nr../beskrivelse:
FS-720/-820/-920 0T2FV0DE (TK-110) Toner-kit til 6.000 pages (ISO / IEC 19752)
FS-720/-820/-920 0T2FV0D1 (TK-110E) Toner-kit til 2.000...
Hi
Is there a way to use non standart paper roll on the km-3650w ?
The machine is configured with 2 paper rolls, first roll the use 841mm (A0), and the second roll the customer want to use a...
Hi
I have looked everywhere but I cannot find the password for the fax remote diagnostic program. (RmtDiag.exe)
/Rune
KM100 with capital letter
/Rune
There is no service mode U078 but I think that it is U074
U074 Adjusting the DP input light luminosity
Description
Adjusts the luminosity of the exposure lamp for scanning originals from the...
Yes still the same code
U251
Press the start key. The maintenance count is displayed.
Clearing
1. Press the reset key.
2. Press the start key. The count is cleared, and the screen for...
Try look at these manuals.
http://usa.kyoceramita.com/KMAGlobalpub/jsp/upload/resource/13433/0/SCANSYS-FENOG-SETUP.pdf
Set the DNS, GW, SMTP server and "sender user 001" email. and min. one...
Try this command
!R! SIOP0,'RESET:0'; EXIT;
or
!R! SIOP0,"RESET:0"; EXIT;
I can't remember about it is " og ' you can try.
See page 26:
This firmware ver. is the best for toner saving.
If you use older or newer firmwares the machine fill up the waste toner box very fast.
Main P2BG3822.0A1
MMI P2BG3823.0A0
Lang P2BG2934.5G2
...