hallo,
changing the pwb-m board and the 1st Image Transfer Pressure/Retraction Position Sensor (PC6) solved the problem.
changing the
Type: Posts; User: Smrekca
hallo,
changing the pwb-m board and the 1st Image Transfer Pressure/Retraction Position Sensor (PC6) solved the problem.
changing the
Checked mean that i changed it with a working part.
Br
i have a C252 printing without yellow. The paper is total blank.
i checked the imaging unit, transfer belt and contacts and everything seems ok. i'm wondering what colud be the reason becuose there...
check the gear wich turns the primary transfer belt
br
yes i know that, but the toner was new inserted, but after cca. 1000 copies we got the message toner empty. as i isaid there was a problem with the toner supply pipe, the toner was rotating but...
hello,
i have two full toner mx27gtma from a pastel that inserted in a machine give me a toner empty message. there was a toner supply problem and it seems that the toner counter reached the...
hello,
yes i have replaced the secondary and primary transfer unit, but from the secon device(wich was a brand new one) where i have now the same error.
i think there is some pcu pwb problem.
hi,
i have a c4-00 trouble on a mx2310u. before that there was a e7-20 trouble. after changing the more pwb's i found out ther was missing one 5v on the dc power pwb. we fixed this and now when i...
hello,
i have a mx2700 working fine exept duplex printing and copying. every paper is stacked in the duplex unit and give me a APDD1 jam. we changed the whole door unit the fixing unit , the paper...
as you see in the attached sheet sim 64-5, so yes it happen on print and copy also.
hello,
thanks for the replies.
we already changed the drum,the developer only, the whole developer unit, the transfer belt unit , almost everything and still have the cyan shadow on top.
i...
hi,
i have a MX2700N wich is printing with blue underground on top. i have changed the drum , developer, transfer belt, i've checked the laser and the laser shutter and still no changes.
i...
sorry, i don't have any experience in ballance settings, becuose we don't use it. try to contact pcounter support,i think that they can help you.
thanks for your quick reply
that was the first thing i tried , but there was still no change. it seems that the eco mode is still active even i have changed the settings.
try in Daccs under settings - accounting - deny login if balance is lower limit = 0
no, the setings are staying changed ,but no affect to the device.
hi,
one problem with the MX3110. when i change the energy save settings it has no affect. the machine is still going into sleep mode after 1 minute. i even tried to change the firmware. any idea?
i have some working installations. just ask and i will see if i can help.
hello,
need more mx-nbx3 kits.
has it maybe anyone on stock?
do you have installed the network scanning or have you used the trial scanning?
hello,
sorry for my late reply.
i changed the main power supply and the trouble dissapear.
thanks for help wazza
BR
hello,
i have checked all the fusers and they are all ok, i changed the hl pwb but no success. do you think that the main power supply is damaged?
i think i will have to order one to check,...
Hi,
i have problems with a Hercules MX-M850. when i turn it on, the machine gives me an F4-38 trouble. this should be an 38V problem. did anyone has got the same problem and how can i solve it?...