Hello Guy'sI having problem with GX 3050n showing Replace ink cartradge for cyan!Afer I replaced it with a new one, its show a new ink only for about 2 sec. and them a massage INK DEPLETED displayed...
Type: Posts; User: m3lvz28
Hello Guy'sI having problem with GX 3050n showing Replace ink cartradge for cyan!Afer I replaced it with a new one, its show a new ink only for about 2 sec. and them a massage INK DEPLETED displayed...
Hi Paul,
I am currently working as Ricoh technician and I'm really intersted to join the team, please advice if still there is vacancy.
Thank you!
Try to interchange the blk laser to other colors it may solve you're problem!
Check this for sure you're problem will be solve shaft for any damage cause by the white bushing if yes replace shaft and bushing, check the Pick up roller holder it may give the same problem when...
Some of the MP 5000 having problem TD sensor Initialization if that included to old production, you may need to up grade the firmware I already face the same problem you can checked the Technical...
OK Sir I will try it! Thanks for the advice.
I'm sure that the user laptop is joined to the domain and in the same work group as the others, and its able to be browse and browse other computer, DNS and domain name is provided
Please NOTE: when...
Could be several things but essentially if I read what you put correctly, the copier cannot resolve the computer name to an IP address. But........... if you use the computer's IP address as the path...
Hi! every one I have some problem regarding scan to folder with mpc 3100,
the problem is I cannot browse the path when I using the computer name in the path for scan to folder, but if I will use...
HI
try to check the actuator of the sensor that attach to end fence on the right side tray clean or change the sensor.
F1 and so as the varistor is blowing.
Recently I visit a one my account that having mpc 2050 previously printing correctly, sending form office 2007 excel after upgrading to office 2010 I starting having problem with the printing excel...
We have been face this problem before, for several machines what we replace is the controller and there is one machine we replace interface board for BICU and Controller, it may accure also if the...
HI!
Can please tell me exactly witch fuse in the PSU is blowing, normally if the main Fuse is blowing check if the varistor is blown and worse case if the varistor did not blow check the bridge...
First make sure the machine is clean then what you can do is do the force toner supply after you got your desire density to the TD sensor initialization to save the amount of toner to the development...
Recently I refer a power supply 120V for MP c2800 that plug to 220v wall outlet after replacing the common parts the usually blown it still blowing.from my side I'm sure that there is no other parts...