the best you can find is oasis and static control.
i'm working with them for about 4 years.
Type: Posts; User: Yair45
the best you can find is oasis and static control.
i'm working with them for about 4 years.
the HP 500 is not available in every country.
i use the HP-300 that has the same parameters.
Blackcat gave a very good advice.
I had several times a jamed IP problem, mainly on mainframe computers that an IP address had to be replaced and we couldn't reset it.
Thank for the info, but it's not there. you can't change that from the menu.
I need to change the number of lines per page to 66, and more...
Thanks for your response...
I need to change some printer parameters that HP support told me to do using the toolbox s/w.
I couldn't find it on HP site or others.
Can someone help me with a link?
Thanks,
:):):)
Hi All.
I've cleaned the optics and the error stoped.
In addition, I've set U087 to no.
On two machines, the error didn't repeat at all.
Have a great week...:)
Hi,
I'll be happy to get a copy if you can.
my e-mail is yair45@zahav.net.il
Thanks.
Yair
This is a very low cost machines for maintenance, so we charge about 140$ per 10000 pages.
a good compatible or remanufactured toner for the 40X0 should cost about 25-30$.
replacing the silicone...
Thanks Rune for the info.
What you wrote is very logical, but the service manager i talked to said several times that it should be 078. I'm going to try and type 078 on a machine and see what I get....
Thank you Blackcat for your assistance and info.
i've checked and found that if i try to scan when the top of the scanner (with the glass) if off, i get this error code. in this case the lamp is...
doe's anyone know what error code C3200 is on the Kyocera FS-1118MFP?
when i scan for copy or fax, just sometimes it is stuck, and i get this code.
is it the feeder or the scaner?
thanks for your...
you are right, but i have seen (last one 2 days ago) a case where the page was copied in the same lenght, but horizontaly compressed to 50%.
this is a main board problem.
have a great day.:)
Need help to get the part numbers for the fuser parts of the kyocera printers and copiers like the FS-1900, 1920, 3800, 1020, KM-2030....
thanks in advance.
sure.
please contact me yair45@zahav.net.il
thanks.
Hi skumar,
on this machine, the toner should have a 63mA fuse on the left side that resets the toner alarm.
if it doesn't work, you can go into the tech mode and reset it by using the following:...
is it just vertical or horizontal? or it is a ratio problem?
Hi offnatriv,
i'll be happy to get any service manual that you can send me for the kyocera printers and copiers.
my e-mail is : yair45@zahav.net.il
Thanks in advance,
Yair
I have found that it happens many times that when you have a feed problem with tray 4, the problem is with a gear and pulley that is broken.
The Sharp P/N of the items are:
Gear - NGERH1405FCZ1,...
I'll be happy to get a copy.
yair45@zahav.net.il
Thanks....:)
I have some FS-1118 machines, that when i try to print a status page, i get a critical error, and i can just restart the machine.
Do you now how can i solve this problem?
Thank you.