13876
Here you go...
Type: Posts; User: cobiray
13876
Here you go...
Sorry, I get punchy sometimes if I don't have coffee in the morning...:D
From the SR5020 parts manual it's on page 30 or figure 15. The motor is item 20 and the PN is B8305565, description is Stepper Motor DC6.7V 16W.
I replaced both of the motors since they were so...
I've got a customer with a print shop that is having an issue with the stapler jogger in a SR5020 attached to a Pro 907. The first few sets are fine but as the machine runs the stapled sets, it...
SP5853 is the mode for loading the stamp data. Searching the manual the E32 shows as a firmware upload error. Are you attempting to do the stamp upload?
It sounds like the board may have failed in the Plotbase PC. You can power it down and re-seat the card in the PC to see if it resolves the issue. If this doesn't resolve it you will likely have to...
Apparently I'm not reading very well today....
Check the brace that holds the units in on the front. It may be allowing the units to "walk" out of the unit. I've replaced a few of these in the...
Start by re seating the connectors on the developer units. Sometimes these can be loosely connected when the units are replaced or disassembled. If you are using the black unit mod on the color...
Yes, each of the white connectors needs a jumper (VRC61134 - Interlock Jumper). Also, each of the cf90 or tr90 connectors above the white connectors will need terminators if they don't have them. It...
SUBJECT: BM-156
SYMPTOM:
BM-156.
CAUSE:
Open circuit in the interlock system.
SOLUTION:
If a trimmer or Cover Feeder is not being installed in the Booklet maker, an Interlock Jumper needs to be...
I'm not sure of the location on these older units, but the newer wide format machines have a release lever on the bottom right side of the drum. This moves the cleaning blade away from the drum for...
Actually, it will show the jam but it will be logged as 001 power on jam. I've also had to replace the push switches for the side door and front door switches on some models. Since it's got the...
1256312564
Here's the white papers on setting up scan to email and scan to folder.
I'm confused a bit as your title and message seem to contradict themselves, but here's a shot. If it's just the black images you're having trouble with try replacing the pcu and developer for the...
Don't use it as a door stop, someone is likely to plug it in and use it. I suggest boat anchor or wrecking ball.
Try replacing the developer if it's over life. If not, you'll probably need to replace the entire dev unit. Also check out TSB #018 for that model. There are part number changes for the pumps and a...
What are the jams codes in your smc reports?
The specific jam codes will be helpful in giving an accurate recommendation.
Have you replaced the feed clutch in the ADF?
You can set up the scanned files to be sent as .tif or .pdf documents.
If they aren't picking up print jobs right away, you could suggest using the lock/hold feature in the print driver. This would hold the jobs until the customer comes up to release the jobs and save...
That is not a valid error code for the BK5010.
Here is the error for BK-004 from the SM.
BK-004
Fault Code BK-004, indicates that the Back jogger motor (BK-M2) had a Cycle time out.
Initial...
Read this thread, specifically post #6 and #9. Also learn to use the SEARCH FUNCTION.
Being able to scan from the MFP seems like a reason to change to S-t-E, but that's only my opinion. If you can't get Scanrouter working again your only other options are new MFP's or to eliminate the...
Try disabling any firewall (Windows or otherwise) and disabling all virus software for testing. What OS are you running? I know it was never supported with Vista or Win7.
You can give this a try...