Search:

If there is toner, then the gasket on the hopper is not in position.
If it throws you developer (starter)=Dcontroler

From the summer of 2022, there are no more of these problems.

The manufacturer has Measure against skew when the document is fed from DADF-C. A long procedure for height adjustments and in service mode adjustments.

Use the laser cleaning stick from the inside of the toner door and clean laser scanner. After that make a full gradation.

Something did not load correctly with sst. Can you use cds upgrade? (via network)

Did you turn off two step verification on your office account?

I didn't tell you to change the transfer belt. Check the image quality on itb! If it is ok, replace the sec transfer roller.

Is the image on ITB ok?
the sec.transfer roller could be causing problems.
If it's not ok:
Try replacing the dc from another device.

What do you mean by "undetected"
Is the black color printed?
Any errors like 20xx or 25xx?

1. Oem toner
2. Set to havy paper.

In the showroom we have a demo dx 8795 with 200K on the counter. It is equipped with a booklet finisher and inserter. A new Varioprint is coming, so we need space. Price negotiable. Only serious...

Can you post a pic of PG-10 from service mode please.

interesting title "problem with canon c1127i and canon mf453"
You have a problem with cheap cartridges.
Even though it is compatible, it should not be not recognized. Contact the cartridge...

Hello,


I can't tell yet because the 1000 also printed flawlessly for the first few weeks. No problems so far.

E732 means that the configuration of the machine has been changed. You have something disconnected, or the device does not detect a unit.

Enter the value inside front reader cover.

COPIER > ADJUST > CCD > W-PLT-X
COPIER > ADJUST > CCD > W-PLT-Y
COPIER > ADJUST > CCD > W-PLT-Z

2. Adjust the shading position.

COPIER >...

Service mode:

Copier/Adjust/Feed adjust/Regist/ Set about 30 less.


Good to know:;)


Leading edge

E197 is usually a problem on the back, inside of the processing unit. Check for damaged cables, connectors...

Is the paper straight but the image shifted or does it not pull the paper straight?
Is the problem from both cassettes?
Is the problem also from the bypass?
Post a pic please.

On Friday, in addition to the 1000, we assembled another 1350. I'll let you know the result.😁

Hi

Do you have any E14 in error history?

Are you a tech or a user? It looks like the drum did not sit well next to the developer.

I was also confused for the first time. The Japanese blew it with this model. You need a screwdriver!

My mistake. C1 has only one main controller and no bypass pcb.
The C800 series has a bypass pcb on controller 2 which is often the reason for the E747-ff00.
Try to clean contacts on ddr rams.

DDR-SDRAM 1 or 2 on main cont.
Bypass PCB
HDD