20132
Type: Posts; User: Jimbo1
20132
You fear it because you have been taught that it's the machine and not the man that's the problem.
I would imagine so. Looks like a fun little item.
Here is another rather overlooked possibility. What is the whiteness of your paper you are printing on? If it is not in the 90's you could be suffering from that. For instance that green you are...
I don't believe that you can.
Vacuums ar always a noise issue but the best is to try and time it between calls.
The customer will have to understand if they want it taken care of noise is just part...
First try to re-seat all the connectors on the main board and I/O board.. If that doesn't stop it try to swap that motor.
Ok....check the contacts on the transfer roller assy. They contact into sockets in the machine and these can give you issues like that also.
Replace the switches on the left door.
"But my sales rep told me......"
:p
I have never used any kind of solvent on a mag roller. Just scrub with your cleaning rags or paper towels. You might LIGHTLY scrub with a scotch brite pad but that can be perilous if you get to...
Did you change BOTH sets of door switches? Because I know that sometimes was needed.
Also can you power it up with the doors open and not get the code?
I never saw lots of those laser units go bad...
I agree. I have been through this before. It's frustrating because the computer is RGB and when you print that information on a CMYK system you don't get the same results with normal drivers. That's...
Also on those older machines there was an issue with drum grounding through the bearing which is filled with conductive grease. i would probably try and check that and change it if necessary. It can...
It's just about got to be a paper transport issue. I wonder if he can stop the paper before it hits the fuser and look to see if it's skewed slightly.
I feel the need to ask a stupid question.
Is the paper fresh?
;););););)
Ha.ha thanks for the primer Ollie.
Oh I am an old Bellini tech and spent time standing outside customers pl;aces beating vacuum hoses against the wall trying to get the toner clumps out. major fun...
Oh I have been free lancing the past year and even worked on ink jet printers.
Never ever thought I would worry with those things but people will actually pay you to make them work.........
...
Which doesn't alter the fact that the more this administration bleats about the people having firearms, the more that are sold.
Maybe if they would moderate their lingo.......
Yeah I was shown some stuff about that. Was real happy to see most of that engine as I remembered it.
The guy i am replacing is moving up to Service Manager and bugged the machine by placing a piece...
Yes lot's of Professional Wrestlers have that many followers there too. Who cares?
And who knows if that number exists in realty?
I can tell you if you watch the mainstream news you will think...
Thanks man. Got that impression but always good to check in with people doing it.
From what I have seen they made have made some smart changes to the engines in places but you never know what they...
Have you any idea how rampant gun sales are just simply because the govt. wants to limit them?
If they want less of them they need to shut up about it. Because people know they have the right to own...
Yoko Ono?
Ok......I'm sorry.......
Yoko Ono?
RIP John Lennon and I feel for her there but she is one of the last people on this planet whose advice I really want on anything.
Well after having worked on Ricoh equipment for over ten years, then almost exclusively Kyocera for four and almost a year sabbatical for family reasons, I am being offered a Field Supervisor...