Just Updating....
Original machine, I replaced the CCD 10days back and let the user observe if the same issue is still happening on the early hours of the day.
So far until now, problem has...
Type: Posts; User: vishop
Just Updating....
Original machine, I replaced the CCD 10days back and let the user observe if the same issue is still happening on the early hours of the day.
So far until now, problem has...
Machine #2 solved. CCD replacement.
And now i have gotten information that on the first machine (1), whenever the zebra pattern happens, it does not happen on scans. Because i asked them to try out scanning by the time they encountered...
Not 3, only 2. The first one, it only happens in the morning, in the first maybe 20-40 copies. I am not sure of the temp but every time i go there, it is always normal room temp.
The second...
Thank you. Confirmed my doubt. I had another machine (2) from the same client that had the same issue, only thing is this one is consistent, even with scans, zebra lines are coming. Make me doubt the...
Hello guys, how are you all doing?
I need some help with a Konica Copier, C284. It has this copy quality issue like a Zebra line pattern, which as per the client is only happening with copy, and...
Hello everyone,
How are you guys doing?
I need to ask regarding the large format printer XL 1500, we have this strange issue wherein the printing suddenly stops. It is intermittently...
Thank you Xcopytech
Hello guys,
Is there any way to test the Fuser Web Motor of a Xerox 4112? I have a doubt that the Web Cleaner is not rotating. I would like to know if there is an isolation test for this motor so...
Worked for me. Thank you
try this: 07412369
Hello Guys,
Anyone can share how to reload the Fiery System Software for IC-415?
I already have the system software with me version 2.1.
PC to LAN connection on Fiery Lan port
Set DIP/SW 1 -...
On any other viewers, it is printing. From Word it is working as well, along with excel, adobe. We tried downgrading the viewer to the Windows Viewer on Windows 7 and it is printing.
We have no...
Hello guys,
Have anyone encountered this issue? I have a brand new HP CLJ M252n, installed on a server Windows 2012 R2, shared on all workstations that are running Windows 10 Enterprise edition....
Hello Everyone,
I need a part # for a gear in a Konica Finisher FS-531. It is those gear responsible for bringing the main output tray up and down. I need the gear on the center. Googling it, it...
Since yesterday, i have been trying to figure out this as well. So far as per researching, if you are using the controller IC-602 (which i think is the internal one), you will be able to have Scan to...
Put back the TTF assy, lock and put all connectors, dont cover. Turn on the machine and while it is warming up, check if the lamp in the TTF section lighting up or not.
Have you double check if there is no problem with your cable running from the machine to your controller? It should be a firewire cable. Try putting it to another slot in the firewire card.
Hello guys,
I have this Xerox 7835 that whenever you print a fulltone or halftone with a white part on it, the white portion is being repeated on the paper, around 95mm after.
The black drum...
so far it is printing well. When it happens again, might check on that tube replacement.
Replaced the Gray Ink, syringe out atleast 5ml of ink, then replaced the G-PK printhead, and print came out well.
Hello everyone,
I'm back on this, and so is the problem. Again there is banding on the print, exact same scenario as my initial post. Banding starts somewhere in the center of the prints. And...
Thank you once again...
Hi again, Do you also know how to enable the "Process Adjustment" Button under the paper settings? It is appearing to one of our machine, and not on another one.
Thank you.
Thank you very much..