Search:

[/INDENT]

Thank you very much for the response, I guess this can solve my problem. But my other challenge is that I am not a German user and the site doesn't provide a language switch. If you can...

I have difficult configuring scanning to folder in Windows 10. Has anyone done that on this model or other ADVANCE series?
I need your help please!​

49654
This one has been my very faithful companion since 2008.
If anyone knows of where I can order for an extra one let me know it please. I will be going for electric one without losing this.

Thanks for the generous altitude!

Where can I purchase Licenses for my old IR A8205?
i). Scan to Memory Media
ii). Scan to Network

Thank you for the suggestions.
Let me see if I will be lucky with the first line of approach.

Toner supply motor M10 was replaced in the first attempt to solve this issue, but NO change.

Had anyone come across this fault in this particular model? The machine has made just 400k images.

Thanks

Any link to site please?

Thanks so much!

What about my second question, where to purchase new Licenses?

Seems like this is a matter of a Voltage Stabilizer which is capable of compensating when supply voltage goes down as well as being capable of limiting it when it goes higher than nominal rating.
...

You don't need any password to enter the Service Mode.
Just use the combination of Addtional Function, 2 and 8 keys

1. I have got an old machine of this model with a Scan to USB Licence and I wish to transfer it to a new one. How can this be done?

2. What is the procedure of purchasing new licences from Canon....

Thank you for that suggestion too.
If you could figure out all possibilities you could imagine cases in which some machines are delivered out of original packing box with less removal tags to follow.

This was indeed the required solution, problem SOLVED!

Thank you very much for the input, thanks to everyone for the suggestions!

I have just installed this Canon IR A6575i III. The funny thing is that cassette 1 & 2 can't lift papers while Cas 3 and Cas4 do.

I am just wondering if there could be any need of some activation,...

Thank you very much for the suggestions.

I isolated the finisher completely and the same symptoms persists which means could be something else.
As for firmware, installed one is ver 80.02 which I...

Hello guys please help with challenge!
When switched ON, the machine seems to warm-up normally and the temperature rise can be monitored in Service Mode to reach FIX-C 200^ and FIX-E 192^ . The...

I have got 2 machines both misbehaving in a similar way.
The work all fine with tray 1 in use.

But when tray 2 is used, a second sheet is always picked which will jam before it reaches the...

Are you a technician?

There is no direct relation between what you did and the BOOT FAILURE fault, it's more of a coincidence.

This will usually result from poor contacts of one of the PCI Cards on the Main Controller...

This gives a good clue asto what to work on.
It's likely condensation has happened somewhere components like optics as well as laser optics, optical sensors, environmental sensor, drum pd etc. Those...

If they can SEND from same terminal that means it's all fine with the line.

Then the two most likely causes are:

1. Country settings: Make sure you select the correct country settings that...

Can you please give more details of the fault. Can provide a screen shot of you view on the display?

Good to know!

:cool:

No single idea in particular, several things must be checked and verified.
To start with, the hardware must be intact, no loose jacks, like the RJ-45, no worn or overcrowded cables, network cable...