Hi all...does anyone know if the KIP black & white toner machines lose any quality in printing black and grey tones as the toner runs down? With no waste toner, I would think it gets recycled (?) as...
Type: Posts; User: chops
Hi all...does anyone know if the KIP black & white toner machines lose any quality in printing black and grey tones as the toner runs down? With no waste toner, I would think it gets recycled (?) as...
Follow up: I was on a Ricoh W3600 the other day that needed a new cleaning blade (double image + repeating black rectangle for ID sensor patch). It was not "spotting" toner on the prints, but...
The spotting on the PDF indicates a toner spill, probably due to a bad Used Toner Basin seal...OR a small scrap of paper caught under that seal. With a bad drum, the spotting is more uniform in size,...
I had my customer reformat their HDD (SP5832-001) due to a rare/first time SC-865.
It got the machine up and running but the IT guy threw a temper tantrum because all the email addresses had been...
I've had to clean the DRESS SENSOR to fix this problem before. It's located on the left side of the carriage. Easy to remove the cover for it(screw is way up on top).
I'd say remove the old foam rollers and try it, even if you don't have any new ones in stock.
Running SP4428-002 may help as well. Follow directions on page 3-16 on the Service Manual. We have...
I remove the LED printhead to get at the main charge corona unit when I change the corona wire. The old 470's, 480's had nice molex connectors on the LED cables, now they are FFC/ribbon cables. Mine...
Finally got in the 2nd lamp from Japan. Prob fixed. The wire going into the ceramic on the original lamp proved to be a really flaky connect. 1st time I ever had lamp probs on a wide format. Thanks...
Thanks for the suggestions: line voltage is steady at 120-ish; resistance on lamp 1 is 4ohms, lamp 2 is 8 ohms (if I remember right).
I even tried a new power cord/plug today. It's one of the first...
It's driving me nuts on a new wide format W5100 MP: consistent SC 542...replaced: power supply,I/O board, thermistors,thermostats. The lamps (2) don't have that bright yellow glow, more of a weak...
Getting blotches of toner (not just images, you can feel them once fused) only on my first print. Also, the fuser cleaning roller is getting extreme toner build-up prematurely. NEW: hot roller, fuser...