anyone seen the ecosys m6535ci a tray1 cassette not set message? I have tried used parts only out of a couple parts machines only, I know the cassette is pushed all the way in, have tried different...
Type: Posts; User: logrady2331
anyone seen the ecosys m6535ci a tray1 cassette not set message? I have tried used parts only out of a couple parts machines only, I know the cassette is pushed all the way in, have tried different...
Gary in Phoenix az. i am trying to install fax system 10 in both a 356ci and a 406ci and am getting that same c0620 error code after install of board. NO dimm comes in the box with the fax...
Hello all,
I have a Magicolor 5550 that does not recognize the additional paper tray that is installed on it. It has the bypass (which I think is tray one and the first paper cassette is tray two)...
We use InMotion hosting for customers without internal smtp relays. It’s less than 150.00 per year and you get unlimited host accounts. We currently have over 500 accounts through InMotion and it...
Sorry for the typo. I meant main board.
Hello all, sorry for the delayed response. We replaced the plain PCs and the issue is resolved. We knew it wasn’t adding toner and suspected a board. The main pwb was replaced this morning and all is...
Blackcat, My senior tech tells me ALL colors are affected. Sorry about that. I know that changes the approach. He can run sim 131 and the voltages/toner sensor levels return to normal. No error codes...
Hi Blackcat,
Thanks for the response. We cleaned the ID sensors of course, ran 140, and 119, 465,469 and 410. Color density returns to normal after dev refresh and calibration in user tools. It...
Hello all,
I have a TASKalfa 7551ci with 38k on it. Yes, not a typo, 38,000 total. We installed it last week and two days later the customer calls and says all three colors are super light/faded....
[QUOTE=bryant28282000;723279]You must not be a technician because google is not always your best friend. If you read that post it saids cancel energy save, I did that and it still after 5 sheets...
A worn out heat sleeve will give copy quality issues like this.
Not sure if this an old topic but does anyone know if the 04's run any better than the 03's??
I have not personally tried a crossover, but our tech was there with the customers IT guy and he connected his laptop to the port on the wall with the existing cable. No light at all on the mic....
Can someone please tell me the correct part number for the updated paper feed assembly on the Task Alfa 3500i? I have 2LC94040 and 2N494040. The latter is more expensive so I assume that's the...
You probably already know this but just in case: the duplex unit has four one ways, two in the front and two in the back. They're on the drive rollers that drive the belts. I've seen a ton of weird...
I've seen it before and fixed it with a reset of.....somewhere in the 5's. Reset then run gradation again. There's a post on this issue somewhere in this forum but it's been a bit.
I think he's talking about the gradation pattern.
Every VOIP provider has an ATA filter for fax machines. Should be around 150.00. Problem solved.
You HAVE cleaned the charge rollers, right?
Hello all, Anyone know a source for Kyocare Ecoysys P3045 (replace FS2100dn) for MICR tonere cartridges? I HATE to think about an HP but this customer runs thousands of checks every month. Thanks in...
When you say you replaced the PCDU, do you meant the whole thing (Developer unit/developer)? With fresh developer it should not ask for toner as the premix in the developer is enough to set the...
Cheat the front door and check to see if the toner bottle is actually turning. If you are using OEM toner you should see the bottle turning when the machine tries to add toner. On rare occasions the...
No dice Slimslob. I configured an MP3502 in the shop here and get the same thing. If I load the PCL5 driver it works like a champ. I don't get the hold, sample or private print functions but at least...
I would check to see of the toner bottle itself is turning. I've seen it once in all the years I've been working on these things. I am assuming you are using OEM toner (if not, depending on the...
Hello all, I have an MPC2551 that I just set up user codes on. I am using the pcl6 driver as they wanted "hold" printing. Everything set up as usual with no problems. I went to show the end user how...