You have to engage the pressure between the 2 rollers you dont have to take the fuser out, just under the green turn handle you will see a slotted screw turn this screw until you here a clonk, this...
Type: Posts; User: pana.techn
You have to engage the pressure between the 2 rollers you dont have to take the fuser out, just under the green turn handle you will see a slotted screw turn this screw until you here a clonk, this...
There are two things that comes to mind first take the metal lify tray out then streach the 2 spings just a bid to give the paper a bit more lift, but your problem is with the cork seperation pad in...
Did your problem return? as I to am having the same issue, I was told it was a grounding problem and I replaced the dev and checked all grounds but it is happning again less than 1 week after the dev...
Yes, just do the f8-25 for that drum you just replaced.
:):)I should clarify when I say blue/black label its the colour of the writing on the label , ie blue writing on a pink background etc.
Regards
Steve
Generic drum?????????????blade???????????? can you turn the drum by hand ( when the assembly is out) also a little smig of grease at each end of the drum may help but if its generic you are just...
drum=60k
dev=120k thats why the maint light goes of at 120k ALSO replace the number 1 corona wire
You dont have to do all that work just grab a spring hook and catch the spring and lope it back over the flag
Steve
They changed there formula a few years back because of the toner dumping isues ( E 3- 40 ) but this is the inportant thing pu is black label put is blue label if there is black label in the machine...
They changed there formula a few years back because of the toner dumping isues ( E 3- 40 ) but this is the inportant thing pu is black label put is blue label if there is black label in the machine...
If you have generic toner in this M/C you must replace the bias roler if this solves the problem (it will be instant) you must then repace the dev and then use only the OEM toner
Steve
Do yourself a favour and replace both the 2 offending fans (fuser and toner fans) they are both bad after you replace these 2 fans you will be fine.
I like Jaybugs answer better LOL
well this may look funny but when ever i come across a sorter/finisher that cant be fixed right away i unscrew it from the rail and flip it around so as the machine will spit out the copies on the...
F8 25 will do it, only reset k this will get you by untill you get your new drum when you install the new drum, it will reset like normal.
Steve
Ifyour m/c has fax on it then your copier got spiked through the phone lines you need a surge protetor for the phone line as well,
Steve
Ok i dont have my maki with me but I had the same problem a few years back it turned out to be the pc board what i did though is first go in with a total counter (from the same family of M/c) if that...
OK if your M/C has a hard drive diconect it and see if it boots up thats all I can think of, well theres1 other thing, make sure your theres no keys on the keyboard that are stuck down i.e stop...
I think yoy may have the machine set up so as its turnes it self off at a certant time and back on at a certant time I would just turn this feature off as I never use it , only the energy save is...
If you by the 120k pm kit its around $500, in it you get the STR roller,cleaning blade and fuser belt assembly, I find theSTR counter goes of first (60-70 k )then the fuser counter then pm...
The toner is the same as far as I know, when the dev is the same then the toner is,as far as generic goes----------------don't, I never have any luck with that stuff its always a pain.
Very good M/C , just make sure the customer has a spare waste contanier on hand at all times as they tend to fill up fast
:)
steve
I could hear the relay click off and i was very lucky i guess. I have had several hard drives go down on othere older models and the machines will go down on start up( as the hard drive starts up) as...
Sorry I forgot you are in the USA and i mixed up the model with the uf 7,000/8000 that take the sd cards.
Thge uf 9000 in the States is our model dp190 up here, you need a flash memory card, they...
Your problem is probably with the toner support mylar (below the cleaning blade)
this leaks toner on the drum sensors under the drum (E-3 40),drum must be removed to remove mylar and clean sensors...