Search:

Type: Posts; User: Gary Bowen

Page 1 of 11 1 2 3 4

Search: Search took 0.02 seconds.

  1. Re: Lanier MP CW2200 not printing from brand new Windows 10 Pro 64 bit PC's

    STOP!!! The CW2200 WILL NOT PRINT IF THERE IS A PAPER MISMATCH!! Be Absolutely certain that the Wide Format paper type in Roll Feed 1 (or 2, depending where your printing from) is an exact match for...
  2. Replies
    45
    Views
    7,576

    [Jamming] Re: Strange problem with Ricoh mp7500

    Just for the record the Type 8000 Print/Scan SD Card is unique to the D052 series only which is the MP 6000. The correct Print/Scan SD Card for the MP 7500 is G338 (which is the Type 1075).
  3. Replies
    10
    Views
    2,319

    Re: MP 4055 SPDF 3100 Error

    You are far too accommodating with your customers. The last time I had a Feeder problem similar to this a tech had already done a preliminary call. When I went in I made sure I had a sample set of...
  4. Replies
    31
    Views
    7,285

    Re: mpc3002 jam between F.U. and exit

    Have you tried adjusting the Buckle with SP 1003-002 for Tray 1 (Plain)? I know you said all 4 Trays exhibit the same problem but its worth a try. Tray 2/3/4 all are adjusted with SP 1003-007 (Plain).
  5. Replies
    6
    Views
    8,626

    [Error Code] Re: MP301 - SC672

    You may want to reseat Controller PCB, NV RAM, DIMMS, FAX. Is a HDD installed and have you tried starting it up without the HDD? What is the frequency of the error. SC 672 is a very common (and...
  6. Replies
    2
    Views
    985

    Re: Ricoh MP C 5503

    SP5875 (set to 1) will disable SC Auto Reboot. If SC Auto Reboot is disabled then the SC code will appear on the screen. SP 7403 will tell you what the Service Code was that generated this reboot. Go...
  7. [CQ] Re: W2201 with color offset in paper feed direction

    On the CW2200 this could normally be resolved by replacing the Encoder Strip which you have already done on this machine. Did you remember to remove the Mylar backing sheet that is on the Encoder...
  8. [Misc] Re: Ricoh MP 401 firmware update to eliminate black lines and occasional white lines?

    These are the 2 Technical Bulletins referred to in this post. No where do I find that there was any Engine or System/Copy Firmware updates that addressed this problem?
  9. Replies
    3
    Views
    691

    Re: Ricoh LCIT RT 4010

    AX040256 DC Motor-LCF
  10. Replies
    11
    Views
    7,973

    Re: 3503 Ethernet Port Not working

    Sounds like you did a mini "refurb" when the machine came in? Did you verify Print/Scan worked when you got the machine or are you assuming it worked? I do a fair number of refurbs and have in the...
  11. Re: need confirmation that this is the right SOP package FW

    Your current SOP Package firmware is a very old version (15.2). The current SOP Package firmware is D1465519N (v27.00), so there is actually a version newer than the one you plan to update. There...
  12. Re: MP C305 - SC899 Will not go away (not connected to network).

    I agree with guitar9199 in regards to the Controller PCB being at fault. These boards seem to cause multiple errors - still. Just had 1 in May throw the 2 codes SC878 and then SC672. The first...
  13. Replies
    8
    Views
    4,774

    Re: MP 301/MP C305 ADF Noise

    Have the same problem with these little gems that you are experiencing. Some feeders (and not all of them) create quite a noticeable vibration from the Feed Head/Separation Pad contact -this occurs...
  14. [Jamming] Re: MP CW2200sp Jam 058 (does not finish feeding new paper roll)

    One of my least favorite machines to work on. Some things to get you started. What is the mileage on the machine? At some point you will need to replace ALL the parts in the Roll Feed Assy - Feed...
  15. Replies
    4
    Views
    842

    Re: mpc3501 OP PANEL on a mpc4501?

    Depending what you need to replace the Touch Panel (D0091488) and VGA Display (D0891498) are the same for the C3501 and C4501. If D0091488 looks familiar it is the same Touchscreen as for the MP...
  16. Replies
    3
    Views
    1,828

    Re: Resolution problem PRO C900

    That is a good point slimslob makes. You didn't mention the meter count on the machine, the PM count or how long the machine was in storage? But go with the cheapest and fastest fixes first. PCDU's...
  17. Replies
    3
    Views
    1,828

    Re: Resolution problem PRO C900

    The problem copy is on the right side not the left (at least when I download it). It looks like you described - a copy output from a low resolution printer. Couple of things I would do: (1) Print...
  18. Replies
    6
    Views
    2,540

    Re: info on MP6002

    Expected yield of the Fuser Cleaning Web (AE045069) is 450K, which is part of the PMD131450K PM Kit (Fuser PM Parts).
  19. Replies
    12
    Views
    3,559

    [Electrical] Re: Test AW020145-PHOTOENTERRUPTOR.

    Ouch!
  20. Replies
    12
    Views
    3,559

    [Electrical] Re: Test AW020145-PHOTOENTERRUPTOR.

    $1.30 CAN is approx $2 US. How much is $79 BRL in US dollars? Again, what is your original error/ jam code? You are probably headed in the right direction - sensors do fail but the more info you...
  21. Re: MP4054 Reduce paper in tray 1 to the limit mark...

    As with any Ricoh MFP make sure all your firmware is up to date. Secondly, the '04 series uses the same Rising Motor (AX040273) as the '03 series colour. Your paper height is actually determined by...
  22. Replies
    12
    Views
    3,559

    [Electrical] Re: Test AW020145-PHOTOENTERRUPTOR.

    I stand corrected. The sensor is $1.30 (CAN) on myricoh.
  23. Replies
    12
    Views
    3,559

    [Electrical] Re: Test AW020145-PHOTOENTERRUPTOR.

    This sensor is around $2 (CAN). Why are you wasting your time wanting to test it? What is your actual problem that has you going down this "rabbit" hole?
  24. Replies
    3
    Views
    1,399

    Re: C305SPF with SC672

    Machine was locked up when I arrived. it would NOT allow me to: (a) Enter SP Mode or (b) Update Firmware. The original Controller PCB would not work when tested on a second machine - same problem....
  25. Replies
    3
    Views
    1,399

    C305SPF with SC672

    FYI. Had a call for a SC878-01 error with the machine completely locked up. Installed a known working Controller Board and then the machine went to a SC672 error. Ordered in a new Controller PCB...
Results 1 to 25 of 252
Page 1 of 11 1 2 3 4