Search:

Now i have, THX to Sama

A dont have it at the moment, part will come in few days. Im KM tech and need some time to find xerox part, that is the reason for late answers.
"Change print cartdrige and clean transfer...

Please, look the attached picture
and if anyone know,tell me what is the problem
22344
P.S.- this happening on print and copy too

possibly is rust, as I had few times that problem on c25_/c35_ and bizhub 250/350 series.
Only bypass working perfectly. try to open and clean clutch, works for me

Ull see on screen that machine needs some flush shit, nothing important for qualiti of print/copy/scan.
u have full instruction for flush notification problem on KM site for tech.

copy/print ok?

Win xp,wista,7x64 Pcl drivers i believe:o

TY!
this worked on 2 machines, rest will try soon!
all have latest firmware, and this start in last month and a half!

Can that bug be a reason for fallout of color when printing? (ex.-yellow is...

demo page is the same!
...so should i downgrade firmware to fix problem? ,(i know that its not recommended to downgrade firmware ,but it can be don!)

is there any procedure to avoid to prevent...

Copies r perfect ,only when customer print images r ...:confused:
14403
Look the color on image!

copie r not ok,too.
firmware upgraded.
all colors r ok, only images r blur,and every of/on machine lose gradation

13169
Copies r ok, when customer want to print ,text is ok, but look at the pictures
Any suggestions?

If nothing helps, do old good trouble resset, u can lose nothing to try:)
...but R U sure that is not only a raport "TX(NG) (err code)" and IP scanner(SU3) is working fine?

Only if P-21 shown on screen without other malfunctions,
when u have other P shown, its logical that transfer will not read all walue correctly ;)

when u replace Y unit, if status p-21 still shows, clean color registation sensors,belowe transfer belt, look in SM to see where they R

Reflushed machine (because already had latest firm.) and now all works fine!
I,probablu make some mistake while configuring ftp, dont know, but now i have new sistem runing on my pc and reflushed...

paper miss fuser, is fuser ok?

Installed new system, can ping machine, can print, can ping PC from machine, but still no smb, so it mast be some config on machine...
but what!?!

Local network, 3 copiers and pc, fixed address for all copiers and pc,using wifi for net , simple file sharing enabled, few different folders shared, i can ping all machines and all print ok, bizhub...

:mad: When i tried to make scan to FTP(without success) I wanted to use again SMB, but it want! I disabled all services running for ftp, did sistem restore, tried new address for machine and comp,...

Yes, i want to know what should I do after peplace the board with NVram.

PerthKMTECH Re: C220toC280 and c203/253to353
that information is not available publicly for obvious reasons,...

Just had that problem, thermostat was bad, just exchanged from old fuser and now works fine
TH3 paper went all over the roller and make damage, in mu case

What part of machine determined tipe ans speed of machine, exept main board.

ex.-C203 and c253 have all parts same, c353 diferent board. How the machine knows how long units shoul work for c203...

thanks!!!thanks!!!thanks!!!thanks!!!thanks!!!thanks!!!thanks!!!thanks!!!thanks!!!thanks!!!thanks!!!thanks!!!:d

I have had similary problem, nothing was broken, I replaced three black gears on the right side of developing unit and that works fine for about 15k copies,and starts again,and again,until I replaced...