Search:

Thanks for the tips. I'm the IT Manager for the office so I have general knowledge of everything but not specific enough to do all of the troubleshooting advice you gave. There's some cyan lines at...

There was cyan toner that was all over the outside of the WTB. Could it be that the waste cyan was clogged leading to that code? I don't know much about the Sharp machines to be able to say that it...

For future reference:

I had the same Code:F2-65. on a MX-5001N copier and the solution was replacing the Waste Toner Box. I tried shaking the cyan several times and it didnt help. Then I noticed...

If it doesn't last 150K I'll get them to fix it (and replace parts) for free. They're good about guaranteeing their work/materials.



Even better! I was beginning to think the colour Sharps...

Yup. Replaced the dev. Put in a new drum. We'll see if it lasts 150k this time.

The colour count on the machine is over 70k and apparently those should be replaced at 60k. At least the colours are...

Just an update for future reference.

The tech said the dev looks fine and no part is missing/needed. But there is a known unresolved issue that may cause a machine to use up developer too quickly...

Thanks wazza, I called a tech to come in. I will ask him about the seal problem. This is the first time it's being serviced, I bought it about 3-4 months ago.
:)

Thanks for the tips. I bought the machine new, it has about 90,000 copies now. Is it time for the developer and drum to be replaced? I've never serviced this model copier so I'll probably call a tech...

My Sharp MX5001N is printing like this today (see attached PDF). It's wavy but the waves are diagonal. Does anyone know what causes this? The toner is still more than half full. Thanks! :cool:
...

It's been a year since that post I made (the one I'm quoting) and around the time I made that post I replaced all the replaceable parts and had a tech come in and do all the adjustments and...

Thanks!

I poked around and found a button called "Gather Option Information" and clicked it. Apparently I have PC-402 installed (not PC-102 or PC-202) and the tray is called LCT not Tray 3. It...

Hey guys,

My Bizhub C351 wont take paper from tray 3 (8.5x11). It always asks put the paper in the by-pass tray. If I try to select the tray when sending the print job it says:

"This item can...

It's fixed now. The problem was that someone put paper (like 1000 sheets) in the wrong side of the tray. So when the tray lifted the sensor didn't detect the paper and thought there was no paper in...

Oops its the 4th tray, I forget theres a manual feed tray 1 first.

So, I've been playing around with it trying to get it to open. No luck yet. But now it's giving a code:

66.11.00 Input Device...

Hi guys,

I'm stumped again, I hope someone can help me out.

We have an HP 9000 that's down. It doesn't give any error messages/codes. The 4th paper tray (the one thats on the bottom) is making...

A couple months back our C351 was jamming on all 11X17's and it turned out that someone pulled out a previous jammed paper with a lot of force and threw a roller or something out of alignment. I...

We have a C351 with 500,000 copies. It has been problematic since it went over 400,000. It still works great under low usage but that's about it. These days if we put a couple thousand copies on it...

How much more life can you get out of it by doing that? Is it easy to do?

Pull the finisher off (if you have one)
open the door on the left side (the one that the finisher was blocking)
take out the Waste Toner Box
Now you can get to the belt, i think theres 2 screws...

They need a username and password to get into it. And only people on your network are able to put the IP in a browser and see the login page.

In case anyone has a similar problem. It turned out to be the Image Transfer Belt Unit that needed to be replaced.

It seems like this might be something I should leave to a more qualified tech. I just hope it can be repaired without needing new parts. I need to get this back online asap!!

thanks, is there any where that i can download a list of the error codes and what they mean?

i've never fixed the cleaning brush before, i dont even know where it is! this is going to be a tough...

Can someone let me know what it means??

Thanks!!

Must be a network issue then