works on nearly all Sharp machines.
21-1 set to 999 for TA
55-3 sw 22 bit 6 from 0-1 cancels DC,DM,DY
55-3 sw27 bit 2 from 0-1 cancels VK
55-3 sw27 bit 3 from 0-1 cancels FK1 & 2
55-3...
Type: Posts; User: mxm
works on nearly all Sharp machines.
21-1 set to 999 for TA
55-3 sw 22 bit 6 from 0-1 cancels DC,DM,DY
55-3 sw27 bit 2 from 0-1 cancels VK
55-3 sw27 bit 3 from 0-1 cancels FK1 & 2
55-3...
The mx 5111 (5112 in the UK) uses the same dev as the mx 5140.
the dev to use is MX-51GVBA
also so fit a new drum and MK kit MX-510MK
Hi
we find using mx5140 type dev units solves solve this problem.
you can use new black dev unit from mx5140 but change the base cover from your cyan unit.
then set up using sharp calibration...
Call it tigger striping, dumping, losing or pulling dev.
why does so many sharp machines do this?
I'm having problems mainly on mx5112 mx5000 type machines and black is the worse for pulling...
Appreciate your help all.
it was the laser
Have tried that, even replaced potential sensor.
thanks for taking the time to help.
Hi thanks for quick response
I have 2 ir 7105 in the same room both using katun toner one is ok.
swapped dev unit from good m/c no difference. And bad m/c dev unit ok in good machine.
visual...
Hi
Does any one have any ideas for fixing light CQ on a canon ir7105
Here is a sample of the fault (image generated from fiery) (test print)
...
Hi hope someone could help?
im looking to trade sharp manuals for a parts and service guide for a Oce CS2124
Here is an example of our fault
http://i154.photobucket.com/albums/s248/momo1475/image_zpsdc389871.jpg
Hi
we have had something like what you describe dotted lines top to bottom a3.
Our tech changed the dm cleaning blade
Hi all
I have just completed a mx753 fuser kit change in what I think is a good time can you better it?
i fitted a mx753kc all parts in box (apart form web roller springs & funny web gear...
Broken gear or broken drive pin housing on gear in the main drive unit probably on the black drum drive is my educated guess.
The fault looks mechanical to me. only happens on black. colour is ok...
Hi mojorolla
I have just had a dm look like yours.
My cause was the end cap from a mx-27gusa had been fitted to a mx-31gusa
Hi
I fixed a fault like yours by chopping away the bottom of knurling belt housing.
this exposed more of the knurling belt to the paper
I chopped 2 - 3 millimetres from the bottom of...
Hi
What is the last few jam codes on the 23-2 print out
Are there all colours on the jamed sheet or is it blank
Hi tosh community.
I'm a sharp tech with a tosh fault that is unknown to me.
Does any one know what Service recommend for spc means on tosh es5520
And how I can rectify the fault
King...
Hi
I have had this fault before it's caused by (in my case) no dm earth this would pull all the toner from the dev making it look black
This was a man made fault in my case
I started...
hi sharphead
is there any chance of an example of the fault sim 64-05 colour & sim 64-01 test patten 11 if possible
polygon same as ar 336/337 ar250/286/287
do you have l6-10?
it may be worth checking 24v supply to LSU also (DC PSU Fuse F704).
...
hi dustin in the arm451 the process sensor or humidity sensor is in the dev unit but i like you cant find the process sensor on the arm450 in parts book there must be one as you can check its out put...
i have had actuator number 7 in pic gain a groove over time and this gave a fault of kicking a sheet out of a stapled set
7 0CW4123R085// STP TRAY SENSOR FLAG
...
sundakib has the machine had this problem from install ?
if it has iam thinking maybe this exit guide (see pic) may be bent or missing from install or the customer pulling intermediate frame unit...
hi sundakib
what are the jam codes related to this fault and could you explain where the paper is falling down
hi i work out of york uk nice
anyway is there any thing after the jam code like cpfd1_n2 ?