Search:

Type: Posts; User: CompyTech

Page 1 of 20 1 2 3 4

Search: Search took 0.02 seconds.

  1. [Misc] Re: Konica Minolta C454e - Does not wake up - Firmware

    Disable power consumption in sleepmode and turn off weekly timer. Also sounds like your HDD is disabled, check in the service mode to see if it is set to Installed.
  2. Replies
    29
    Views
    5,936

    Re: Replacing the printer and copier business

    Guess who Staples bought last year? Staples, Inc. Signs Agreement to Acquire Leading Document Imaging Technology Dealer DEX Imaging | Business Wire




    The future indeed seems to be going the...
  3. Replies
    6
    Views
    806

    Re: 368 home screen configuration

    Try: User Settings, Custom Display Settings, Copier Settings, Default Tab set to Quick Copy
  4. Replies
    18
    Views
    9,454

    Re: Konica minolta "i" series freezing up.

    More likely they're sourcing the cheapest flash memory chips they can get a hold of.

    Which means quality goes down.
  5. Thread: C658 vs C759

    by CompyTech
    Replies
    12
    Views
    2,104

    Re: C658 vs C759

    In a nutshell:

    C759 = C754e beefed up

    C658 = C554e beefed up

    C650i = C658 with the new i Series interface.
  6. Replies
    7
    Views
    3,529

    Re: Konica Bizhub 4050

    I agree, could be the screen. Had one stop responding to touch, also had one that would never get past "initializing" displayed on screen. Unfortunately for this model you need the screen to update...
  7. Replies
    14
    Views
    3,756

    [Dead] Re: KM808 customer copied money

    The machine does have a color scanner though. Have seen a similar issue before where the customer was scanning checks to email and the mfp would error code. Only by making a copy of the check and...
  8. Re: My first EVER flat battery and the symptoms that came with it (C224e)

    Had the same thing happen not too long ago. The data corrupted ended up losing all settings and counters, only thing stayed was the consumable life counters.
  9. Replies
    9
    Views
    3,563

    Re: c754 Won't turn on from power saving mode

    Weekly Timer - Off.

    Power Consumption in Sleep mode - Disabled.

    Those should do it. Worse case just disable sleep mode, however you'll wear the fuser out quicker.
  10. [Misc] Re: C258 Change Drum Units message with 30% life remaining

    You mentioned account track. Presume you entered the account track information in the print properties of the driver?

    Also if your laptop has an ethernet port, you could direct connect to the...
  11. [Misc] Re: C258 Change Drum Units message with 30% life remaining

    If you can print reports sounds like it's network related. If you print something to it, do you see the blue data light on the front panel flash? If not then the print job is probably not reaching...
  12. Replies
    4
    Views
    6,931

    Re: Konica Minolta bizhub 754e C3101 !

    There's a plastic bushing that sits on the drive shaft of the M29 that cracks. Design was changed to a brass bushing. Might be better off replacing the fuser drive assy.
  13. [Misc] Re: C258 Change Drum Units message with 30% life remaining

    Go to job list and check the history and if it was deleted what do the error details say?

    Also try this, go to User Settings, Printer Settings, Print Reports and print the Demo Page.

    Sounds...
  14. Replies
    10
    Views
    4,412

    Re: Konica Minolta C458 Printer Area

    The default IS 0.

    More than likely whoever did the setup of the machine changed the numbers.
  15. Replies
    24
    Views
    6,342

    Re: color line probleme

    You'll have to upgrade firmware possibly first. Then there are 2 software switches to enable. You also have to make sure the Stop Life is set to Not Stop. There is a tech bulletin on the KM site...
  16. Replies
    3
    Views
    1,762

    Re: BH558e and demo page

    Had this happen before. User settings, printer settings, some one changed the paper type. Change it back to plain should work fine again.
  17. Replies
    5
    Views
    1,704

    [Misc] Re: Bizhub 4 series fuser squeak

    I replace them. YPP claim if possible, usually can get full or partial credits. Not worth the trouble to try to grease them IMO. By the time you remove the unit, take it apart and guess where to...
  18. Replies
    6
    Views
    2,183

    Re: Update from 3.4 to 4.2 is not successful

    I've found you have to reboot after function version up to get PSWC to work properly. It's something I almost never think about as I seldom have to access PWSC after a firmware update.
  19. Re: Bizhub C754 toner level incorrect value display

    Had this before. Usually its one of the toner chip contact pins on the machine is bent.
  20. Thread: bizhub 350

    by CompyTech
    Replies
    2
    Views
    845

    Re: bizhub 350

    The actuator on top of the turnover/exit unit is either off or out of position, 9 times out of 10 this is usually the cause for me.
  21. Replies
    65
    Views
    24,993

    Re: C250i going offline and noisy

    That noise sounds like what I had on one of the 8e machines recently. At first I thought it was coming from the fuser area. Ended up being the transfer belt cooling fan.
  22. Replies
    7
    Views
    3,731

    Re: C454e consumables life setting

    You can reset the transfer roller and toner and ozone filter counters individually. If you reset the transfer belt it will reset those counters along with it.
  23. Replies
    16
    Views
    3,047

    Re: bizhub c258 fixing unit

    Had this problem before. Ended up being the power supply. The kicker was the power supply and MFPB had been changed before because lightning hit the building and took them out.
  24. Replies
    11
    Views
    5,873

    Re: Do you trust Alexa?

    AS far as Alexa goes in copiers... Its a sales and marketing thing.

    Also so they can sell you toner and paper through Amazon. That makes sense to me.
  25. Replies
    13
    Views
    4,263

    Re: Oldest or first web browser you used was?

    I remember seeing that term back then. I'm pretty sure I switched to IE at the time as it was becoming "The" browser and Netscape was pretty much dying out. Often some sites wouldn't even load in...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4