Hi Brian
Where is this gear? I see the elevator dual gear. Am I looking at the right area? My eyes are not what they used to be. Thank-You
Type: Posts; User: wingit
Hi Brian
Where is this gear? I see the elevator dual gear. Am I looking at the right area? My eyes are not what they used to be. Thank-You
Hi fellow techs
I can't get a handle on this intermittent jamming(every 8 to 10 sheets) coming out of finisher and 1 sheet on the conveyance tray and 1 coming out of the fuser assembly. Happens...
Hi Hansoon,
The EP-5400 what I remember had a organic drum, your thinking of the EP-8600 Ep-8601, Ep-850, EP-550 POS. All Dogs in the U.S.
I am probably your age, Ep-450 cadmium , I am...
Made it home before major snow, so I took the back off, pulled out nic board reseated boot and memory boards,
reconnect all connectors. Turn on copier, sharp screen does not come to ready state,...
Thankyou all, I am going back today, expecting snow soon, if not then tomorrow, I will try all your suggestions first.
Hi,
New customer has a Sharp AR-M350 meter 697,300 , 6.04 pcu,9.03 main, 4.02 boot. Not sure if
this is the latest available, or if this is even available. I read here, on a ar-m355 could be...
Hi,
New customer called today, for this HP Pro MFP M130FW (TOY)
Control panel not lighting up after client removed jam in auto document feeder, then
She noticed the operation panel was...
Wanted HPLJ 5000/5100 Top Rear Panel
As long as the where the front panel is able to attach, I am ok with that. aesthetically not as important.
Part# RB2-1748-000.
Or any place other than PR or...
Thank-You ,nikolai.aleksie and GeneOR95
Sure makes the job much easier, for Mondays call.
Have a wonderful weekend.
Hi
I am in need of a Kyocera Ecosys M3550idn service manual to replace a 500k pm kit
Thank-You in advance.
Brain fart, Maybe this will help, the part # FC5-0011, No longer available from Canon.
Thank-You
I am in the need of Canon ir1630if Auto feeder hinge. Fits these other models as well. This applies only to these models that have a automatic document feeder. I understand Its old, one client loves...
I Apologize I am in the wrong forum, I should be in the for Sale, Trade, Wanted section.
Sorry to waste a click on someone that can't read tonight. Hope your all doing well.
I am in the need of Canon ir1630if Auto feeder hinge. Fits these other models as well. This applies only to these models that have a automatic document feeder.
Thank-you
Let me know cost of part...
[QUOTE=Brian8506;1547534]See that I just learned something. 41 years and it’s never too late to learn something new
I had a 4025 with no finisher and could not get it to offset, but maybe the...
I had this on the optional 2nd paper tray, and replaced all the rollers,torque limiter.Still double clutching and jamming.
It ended up the solenoid pawl needed to be filed down so more of the pawl...
Problem resolved, I went back because customer called for light copies when copying,scanning to thumb-drive and scanning. The blacks where good only on one side I ended up removing the top mirror...
Happy New Year to All
Can a canon tech guide me in how to clean all mirrors in The reader, The service manual on 7-19 Parts Replacement and cleaning Procedure does not explain to get to all the...
OK, Thank-you , That,s what I am missing. I thought the thumb-drive came with every thing on it. Plug & play.
No, Is That what I am missing then. I was sent firmware via drop-box, I thought all I had to do was unzip to a new folder and pick the yellow folders after extracting zip.
That's for your suggestions, I must have downloaded my firmware improperly,the screen says 19.1 or 19.01. and keeps telling me to turn off or hit reset button. It should say I believe 50,03 I must...
Sweet
Thank-you. Level 2 That's what I call service with a smile.
That worked, :)
A update , I reinitialized the all data setting and did not get rid of the MPSF in the upper left hand corner. What am I missing? Please Help.:confused:
Thank-you Canon guys and gals.
Thank-you so much , just want to make sure , I want to do what most techs would do when up-grading firmware, I really appreciate your expertise, I was a expert 20 years ago, now different story....
Hi, I need Help with installing 50.03 on ir 3225 copier. Current firmware is 42 or 49 right now.
The copier is running most of the time, customer has to shut copier down a few times a day. Due too...