Have you ever removed the drum unit? if you did try to push it in until stuck.
Type: Posts; User: adhy
Have you ever removed the drum unit? if you did try to push it in until stuck.
Why are you unplug the adf scanner? The double sided Will not active when it's not setting on
Now this is happen
51508
Additional function-28-addtional function >copier>function>clear>err>ok
Than restart the host machine
Me too makes me confused
By entering service mode
I did reseting and still error'.
Hello there
I got E000c0 on my Canon IR5075 ,had been reset error but still displayed .
Any help would be apreciated
Thank you
51290
I think the problem is at the embended memory on mainboard PCB 2. If you can't not replace the memory then just replace the mainboard PCB 2.
its so thanksfull if some one could send me the Bizhub C 350 firmware.
my email : barkle.titanium@gmail.com
thank you very much
i clear the ram on 3rd level service mode...
hello everyone thanks for your replies...the problem has solved. the copier is run properly with no the message appears again.
thank you....
i am sorry Teckat i forgot to tell you that machine is normally(the message is go away) when we waiting for about 30 minutes after main power is turn on.
truely this is very annoying us.
Hi Teckat, thanks for your respon.....is it possibly if i just reinstall the firmware of the HDD without replace it?
Thank you.:):)
Hi KL568 thanks for fast respon...can you give me an explain in details.
best regard.
Hi
Anyone can help me, I got problem with iR3045 that written on the display " remaining data is not needed is being erased.do not turn off the main power" every time I turn on the machine.
Any...
Hi Buddy check your email..
check your email....
sorry i mean a hug.
I need a hugh...LOL.
The Attached files was gaining my knowledgement as ussually.
thanks for the field supervisors.
My costumer has IR 5075 and he is calling and telling me that the IR got error 0423-002. i just take a look to the Service manual and saw that the SDRAM has a problem. perhaps some one can give me...
Hi try to replace Roller Spacer(FB2-8519-000) on developing unit.:o
thanks for you response, do you have any idea how to repair it, i have been re- setting on feeder but no change.
its IR 6570..