can anyone help
i have several machines mpc 4500 and mpc 5000 an my clients have upgraded to windows 10 and scanning stopped working...
connection test comes back as successful, but when they try...
Type: Posts; User: pukiro
can anyone help
i have several machines mpc 4500 and mpc 5000 an my clients have upgraded to windows 10 and scanning stopped working...
connection test comes back as successful, but when they try...
thank you all for your help!
i have the usb card installed and have the host extension... connected them.. but cannot see option to print via usb on the print option...
Hi
Technician Wanted in London
We mainly deal with Ricoh mfp's, experience in servicing and setting up network and scan would be ideal..
please contact me ronakpatel@pukiro.com
regards
Hi
i have a mpc 4500 and mpc 5000, and my client wants to print directly via usb stick (pdf). I was told to install VM card Type C and the usb extender... but no joy...
can anyone help??
...
hi mate,
just format the HDD and initialise the address book
this should sort it...
-Ronak
if you cant log in using: admin & "blank" or supervisor & "blank" then your only have one option and that is to change the nvram!
p.s. dont forgot to upload the ram data before changing as this can...
hi
do anyone know where to connect a counter meter to a mpc 2500?
p.s. need to count b/w copies only
thanks
just turn the paper the way in the tray... simpless
hi
did all of that, made sure wim is on in sp mode etc... still nothing no error in the printer error log either...
:confused:
hi thanks for the reply...
the funny thing is cannot even log into the wim... just comes up with HTTP 403 Forbidden...
ive switched on the telnet via command prompt etc, but no luck
hi
first of all the green and amber are on, scan to folder is working fine... i can ping the machine from the pc and ping back to the pc from the machine, the nic is on "1"
but when i send a...
nope nothing, just an error in the printer icon
HI GUYS
I have a mpc 4500 and the damn machine isn't printing, ping from pc is ok... scan to folder - no problems!
but when sending a print job is fails....
all firmware is up to date
help!
...
hey thanks
where is it in sp mode... i cant find it anywhere... or i must be blind...
Hi
i keep getting this error when accessing the wim thru i.e.
"503 service unavailable"
any ideas
thanks
I HAVE A FEW PS3 SD CARDS FOR SALE...
PLEASE EMAIL ME: ronakpatel@pukiro.com
hi
I have a MPC 4500 the first problem i had was that is was not printing... i installed drivers etc.. even the ping to the machine was ok... but every print job failed...
then i thought it could...
thanks guys! for all your help!
going onsite on tuesday, will let you know what happens!
thanks again!
hi
thanks for that guys! i have cleaned and then replaced the feed rollers... i changed the orienation of the paper and there is no jams or creased... wierd
still no luck....
hi
i have aRicoh 2022, and when copying from tray1 i get creased copies, this doesnt happen when copying from tray2. Ive changed the pressure roller in the fuser and still no joy...
any ideas?
Hi thanks for the reply!
in sp mode 5 there is no 104? (a3/dlt double count)
looked through it several times and it is not anywhere.
Regards
Hi
welcome!
We are exporter of Ricoh machines based in the uk.
Please let us know if you should require any machines etc....
Regards
Ronak
ronakpatel@pukiro.com
ronakpatel@pukiro.com
Hi
I dont seem to have the option in sp mode to enable double count for a3 and dlt copies/prints...
can anyone help?
Regards
Ronak