Hi All,
Hope someone can help me with this one, When I do a printer only auto grad it stops after about 5 pages with the message auto grad canceled.
I have notice that the last two pages with...
Type: Posts; User: Van Steal
Hi All,
Hope someone can help me with this one, When I do a printer only auto grad it stops after about 5 pages with the message auto grad canceled.
I have notice that the last two pages with...
Sorted,
Remove front panel!
Hi All,
Anybody know how to eject a disk from a Fiery A2100.
Cheers, Brian
Good Job, thanks for feedback
you need to replace the duplex motor driver pcb, you'll find it at the back of printer attached to the plate were the power for optional two lower trays plugs in.
It's the same as 3225. If you fail to get into service mode you have to hit the yellow reset button each time and start again.
your missing the arm that racks up the belt at the rear. Its the same as the one on the front.
This is known as "tailend skew". You'll see it in every 51xx series, mostly on A3 or larger, mot much you can do about it:mad:
Go to the PRINTER tab on the lcd, press function-print pages-print config page.
Have never had to do that, read attached file
[QUOTE=JohnnyUtah;291559]I have changed a million or so waste toner bottles in Xerox machines, but I'm not quite sure where to start on this Canon. I'd really like to be able to do this without...
make sure all filters including ozone are replaced, heat buildup in the printer can cause this. Make sure the software is up to date and read release notes as there are setting in service mode that...
My money is on the user placing paper on far right sensor flag (a3 detechtion sensor) when copying a4. Took me several visits to a customer before they finally did it before my eyes:mad:
Happy to help:D
You need to clean the Meg toner senser. remove front cover under the toners, second senser from the left.
I've had this after I upgraded the software from ver 65 to the latest ver. I had success when changing the country setting in service mode-option-body(i think) and config. default was set to NL....
Your welcome:)
Check the spring on the sensor arm.
Are you taking the piss?:mad:
Yea, Thanks zoraldinho, you completed me:D
I know its not a printer related question, but I just feel there's something missing, and I think this would complete me;)
As always lads, Thanks:D
Thanks charm
Thats the one I was looking at but not sure if it would work as it doesn't list win 2008. May just have to use the PCL if it doesn't work.
Hi all,
Is there a ps driver for win server 2008 x64 for the fiery H1 ver 2 (CLC5151). All I can find is the pcl.
Cheers
authentication is need for gmail and also you need to change port from 25 to 465