Is the invertor the small board the lamp plugs into? I know that on one, the lamp is physically broken. So is the invertor a commom problem? On the older Minolta's, I have changed several of the...
Type: Posts; User: Copytech
Is the invertor the small board the lamp plugs into? I know that on one, the lamp is physically broken. So is the invertor a commom problem? On the older Minolta's, I have changed several of the...
I have 2 Ricoh mp6500 machines that have a bad lamp for the touch screen . Does anyone know if you can buy the lamp seperate ? If so, a part # and source would be appreciated. Thanks
The web motor was the problem with the last machine. I have had several web motors go out and have used the motors out of the charge corona units from 650, 551, 1060 parts machines. I just extend...
I have a few of these recently that have been making intermitant noises from the fuser or exit section. It sounds like a loud vibration but goes away before I can troubleshoot. Any ideas on a fix?...
OK. Thanks for your posts. I have tried admin and supervisor with no luck. I will order the nvram chips. Will the nvram off a used mp3500 work if I just enter the new settings?
The login username and password for the web interface has been changed. The default admin, or supervisor won't work. Is there any way to re-set to default on this model? I have checked all the SP...
I have changed: laser diode unit, door switches, harness to ld unit, checked all connections. sc 220 everytime. Can bad firmware cause this? Where can I download current firmware from?
Ricoh mp 5500 gets a sc220( laser synch. detection. ) error every time. The paper feeds to reg. roller then then sc220. I have replaced the laser syc pcb, laser motor, laser detect. pcb. with no...