UPDATE
Just for info it was only the print calibration that was the issue, The copy calibration was fine.
After trying numerous resets calibrations, firmware in CN mode etc,
We copied the...
Type: Posts; User: Ditchman
UPDATE
Just for info it was only the print calibration that was the issue, The copy calibration was fine.
After trying numerous resets calibrations, firmware in CN mode etc,
We copied the...
Hope someone can shed some light on this one.
After running calibration 46-74 - copy calibration is fine but on the print calibration the printed the adjusted patch is all washed out. (The target...
Firstly, I’m usually working on Sharp machines so excuse the lack of knowledge on this.
We have taken over a customer site which has four Kyocera 2552 machines. We have added two Utax 2506 to this...
I have a few of these in the field now and two in particular that are doing high volume. It’s ready for its 600k maintenance now and I’m thinking it may be more economical to just change the...
Did you get sorted?
That’ll be the problem in picture
It may sound stupid, but have you manually tried moving all paper exit trays etc by hand. Something tells me this is a very easy fix. Can’t be sure but think it’s an easy one
i would suggest...
Try creating a new user in local
users and give it full permission and sharing etc.
Have found this works even if the original user credentials were perfect.
Makesure SMB 1 and 2 are enabled in...
Has anyone got this bulletin? Doesn't seem to be available on UK site
Definitely the flat cables mentioned on MFP. Clips are very strange in them. Double double check
Can we see some examples please
Have you not got access to Dbox website?
I have changed both both fans and indeed checked all fans in the general area, all appear okay.
Have also changed the PCU pwb and reflashed the firmware but still no joy
Hoping someone can shed some light on this
Machine is booting up with code straight away. I Have changed the fan and also the harness. one strange thing ive noticed is that in sim 30, main unit...
Change the drum unit first before you try anything else
may be electrode cover leaking also!
You can change the layout to 4 big icons 8 or 12 icons
should be in system settings,
Clean the LSU before you do anything else
UPDATE
All modifications had been done also
Problem turned out to be primary transfer unit
Ran 15k through all going good now.
Thanks
Yeah complete drum units, out of the box
did you get this sorted?
Hi guys,
Have a problem with the above, the Black Dev tank is emptying itself every two or three days.
Have tried new drum and re-devving twice.
New Dev tank
new process electrode
new HV pwb...
It has the professional finisher.
At the minute I have 3 power leads in.
one for paper supply, one for main machine and one for finisher,
Do you think there is another?
you will need to redev this but changecdrum and charge this time, no dev left in unit
Hi Guys just wondering could anyone shed any light on the above code.
Im a Sharp trained engineer so have no Xerox experience but looking at this machine for a friend. I have surmised that there...
What paper type should I use for c4 envelopes, I've tried all types and they all seem to be causing crumpling..
Any help would be great.
Thanks