Next time they say"can I make a copy?" just say "No. You mean "may I make a copy". And if you can get it back together, you may!"
Type: Posts; User: fbriggs
Next time they say"can I make a copy?" just say "No. You mean "may I make a copy". And if you can get it back together, you may!"
The Kyocera regional service rep came out for the "waste toner bottle not inserted" or "waste toner door open" message. This is not the false "waste toner full" message. He brought an entire waste...
We have several new 4002i machines stating that the toner door is open, or the bottle is not inserted. The Kyocera rep is coming out this week to take a look at them. I will let you know how it goes....
Also worth noting, to avoid some headaches, is that Chrome won't login even with the correct password (default is [blank] ). So I tried IE and boom - login no problem first try.
...I hate IE.
1022? We fix these by pushing them down the stairwell on the way to the trash bin.
29 years ago I started talking to pretty secretaries (receptionists) and quickly learned to turn on the vacuum cleaner when I needed to fart while in an office full of women. I occasionally fixed a ...
Need E1 finisher parts manual. I need numbers for
the mounting screws that attach the finisher to the copier, and the exit sensor actuator.
Thanks!
What we really need to know first is, what direction does the pizza spin when the cook tosses the pizza down under? Clockwise, or "anti-clockwise?" (or "counter-clockwise" for us Yanks.)
Could it be the paper feed clutch? Does it do this from both paper trays?
I found 2075's to be notorious for this.
Thanks. I just found a source for the part.
That is probably the older, larger one, as opposed to the newer, smaller one.
Yes, this would normally solve the problem. But, if you can, i would recommend updating all of it.
Need part number for the complete (with hinges) top front door (the one you open to replace the toner) on a Canon IR 6055. Will trade for Ricoh or Sharp manuals.
I found that updating firmware got rid of this problem.
I had a similar problem with a 4110. It was making a black ghost image of a cyan image. The weird thing was it produced the black ghost image ahead of where the cyan image was. It ended up being the...
I have seen this when the print driver needs to be re-installed. Of course, make sure the firmware is current. I have also seen where we had to re-install the older version firmware due to...
I had an MPC 7500 that had a wire harness laying against a motor in the finisher, so that when the motor was spinning it was wearing away the insulation, causing intermittent jams. Look to be sure...
Also check and clean the optical sensors in the paper path.
My thought is the fuser roller is running too cool, but maybe only occasionally. It should throw a code, though. With OEM parts, OEM toner, and all of the fuser temp settings set to their defaults,...
Check drum ground, and make sure the power going to the copier from the outlet in the wall is supplying the correct voltage constantly and that the nuetral line is close to zero volts ac and that the...
don't forget you need to reset the watse toner bottle useage time to clear the code, after you clean the sensor.