Thanks for the input. The customer is close, so I may just go pull it out and look at it. I hate making a return trip and not having all the correct parts
Type: Posts; User: Reed
Thanks for the input. The customer is close, so I may just go pull it out and look at it. I hate making a return trip and not having all the correct parts
I Went on a machine yesterday with this code. Do I need the motor and the housing or just the housing. (it is making a clicking noise)
I know this is an old thread but I wanted to give an update on this code. I went out on a Xerox Versalink C505 (similar machine) it kept saying to reinsert black toner. After further observation I...
I've had to use the PS driver sometimes instead of the PCL or vice versa for a few weird issues like that
precision roller shows they have it in stock
Order a Frame and replace it. If that screw never tightens then the frame is starting to crack. Just like anything, the first time takes the longest. It really isn't that difficult
If you are having trouble getting a current firmware, you can always use an ftp program to scan to the network share.
I have one for you. A couple months ago I went out to a client because they said their copier was putting "holes " in the paper. When I got there I tested out the machine. They mainly use 11x17. ...
I would agree. The 4e series have been solid machines. Kyocera had a solid machine with the Falcon Series then they went and completely messed it up when they went to the TaskAlfa 3500i style. It's...
my old black one got stolen. I miss it a lot !
check the firewall and any anti-virus/malware programs. Make sure you have enabled the exception for smb or the ftp program. Generally if something is blocking the ftp, such as Norton or McAfee,...
If you do this be aware that the IP address may change. I have done this several times on a machine that has been installed and each time the IP address changed to DHCP. I had to go into the network...
Change caps and or snip fins. Thats what we have been doing
If you don't always want to change out the feed and sep roller at the same time. I usually rotate the tires ( as long as the feed roller looks good). I will throw out the sep roller and replace it...
I have done it on the 4e series. I used on from a B/W model on a Color machine. It did change the meter and I noticed the new color meter was "0" . The ssd board will also have other information...
Replaced the RSDF driver PCB and that took care of the problem ( I tried replacing the DF input sensor but that did not resolve the problem)
I have had to replace the entire ADF. Not difficult just takes some time. I've seen the ADF base crack and the only way to fix it was to replace it. I have seen this happen on older Kyocera...
When the "version" is changed through software switch 25, It will change the web interface. Usually "version" is changed (ex 3.2 to 4.2) it is done when the FW is upgraded
try logging win with Supervisor, no password
Just do google 2 step authentication and have it generate an app password. Its pretty easy. Doesn't take much longer than the Less Secure app procedure
I have used something similar. It is a GL-iNet 300 or a GL-AR750. Pretty easy to set up and sometimes the copier USB will be enough to provide power to the box. However they don't always seem to...
Agree with all of the above.. Good Luck
Went out on a Sharp MX2640 with the RSPF document feeder. I can put one set of documents in the ADF and they will feed fine. If i try to put a second set the ADF. The machine no longer recognizes...
It only happens when scanning to a destination. I tried 2 DF 704's and cleaned the adf (DF 704) sensors on both document feeders that I tried. I also changed out the Dual scan PCB that attaches...
I can't seem to locate the"auto rotate"
I have already set the default scan size to 8 1/2x11