don't mean to cause any harm however is this ad/response to a question always necessary???
Type: Posts; User: Incredible1
don't mean to cause any harm however is this ad/response to a question always necessary???
tech reset control panel and fax ? then the @ became functional. (it wasn't greyed out before the reset.
Thanks very much for your response!
Hi everyone! I'm new to hp's. My tech is working on an hp 3050 when he manually enters an email address the @ symbol "beeps" but doesn't appear on the screen we, thought it was a bad op- panel and...
IF the master rolls are keyed the same the rioch jp1230 mater flange number is c2312243:)
had the same code on the ricoh 180 main motor fixed it
Ever heard of Google? What a great reply to an honest question. aren't forums like this supposed to be supportive of thers questions?:confused:
Yes there are other tech forums out there but...
I agree firmware has fixed sc991's in the field for me.
believe it or not check/replace the reg. clutch sounds crazy but the single side should vary a couple of mills but will cause jams on duplexed copies.
I know this is an old box, however I have (4) units in the field three do not have HDD's they are all periodically showing sc990's. they are not in the same location.
we have replaced power supply,...
I believe the cost of filters out ways the benefit. We used to send all devices with surge suppressors. but haven't noted a lot of issues without.
with the background on the meter page,sounds like a ch wire also i'd check the corona end blocks and if not cracked isolate them with teflon or electrical tape from where they seat on the alum. ch...
I have had several 790's with this issue. (usually landscape) If you remove the lower turn gate from the finisher there are sometmes small "cuts' in the outside ribs where the edge of the paper digs...
13 years ago my best friend said Hey! if you want a job try the copier company i work for! After a few years he left the industry and I'm still here!
What a pal!
:)
I still have 46 of these @#$(@(#) wonderful boxes in the field :mad:!
like me falling off the shipping dock? or "accidently" being ran over by a fork lift?!!:D
ricoh 1224 and 1232!!!!!!!!!!!!!!!!!!:cool:
ricoh hp and some oki
I have seven techs on my team 24 at our location
I'm a technician.
I have had a couple of slow print issues as well and post script fixed them. HP printers come standard with ps.
any error codes? could be the id sensor not reading the correct patch density. or maybe a t belt / cleaning issue.
it is probably the clutch pack, Called the transport bracket. # B0514807
I believe the answer is no, because of the required blank lead edge and side margins.
Steve just to confirm I had phantom jams a coupke of months ago, as you're describing and replaced saftey switch no problems since