New firmware might solve the issue- system/copy 1.26, Lcdc 1.10, websupport- 1.11
Type: Posts; User: dawn
New firmware might solve the issue- system/copy 1.26, Lcdc 1.10, websupport- 1.11
Got the same issue. j099 occurs when the double feed sensor detect the paper weight more than the preset settings. I just dis able the double feed sensor sp1-302-001 to 006 for each tray.
Get back...
Thanks anyway. Problem solve already. Special service mode can be done by turning the power on while pressing jobreset and arrow down button together. ;)
Greetings to all,
Situation: I have replaced NVram for controller to zero the meter.
Problem: I can't change the SP5045 to 1 for page counter selection.
Anybody knows how to do it or how to go...
Thanks, its already been resolve. ;)
Okey, i will try. Thanks
Problem: user is printing 3 pages of 1 excel file but machine produces 2 printouts only using pcl 5 printer driver.
Any solutions or work around would truly be appreciatted.
thanks
open the development assy and check the toner entrance filter it it is clean. and if not clean it. the toner will always accumulate in the toner entrance if the toner filter is dirty that causes the...
Any update for this issue? It would be a great help for me.
Thanks
Try replacing laser unit.
my email is isinj@yahoo.com.
5 years xp in konicaminolta and 6 years and for ricoh machines.
11 years in copier industry as service engineer. Currently working in dubai my email is jid1281@yahoo.com.
If you already replaced the suspected parts then check the hot roller the orange color roller if it is already worn out. If so, replace it.
My email ad is jid1281@yahoo.com
Thanks. Hope to hear from you soon.
I'm a service engineer for 10 years. And Im currently working as a senior engineer in dubai. Im a konica and Ricoh certified engineer.
Thanks.
I'm a service engineer for 10 years with different brand of mfp. Im currently working as a senior engineer. If interested to hire me. Please leave me a message. Thanks.
Thanks guys for the advice. Best of luck.
As what other guys recommended. I do agree better upgrade the firmware.
Have you guys encountered a failed result of TD initialization on MP 5000 upon initializing new developer? Any advice would be of great help. Thanks
Enable fax forwarding using email.
Check the lot number of the toner if it is new release. Old toners have a toner filming issue. Lot number can be found near the tip of the toner.
Check the part numbers if it is for that model.
check the metal where you put the platen glass if its even. Sometimes that will be a problem.
Thanks for the advice but I did it already.