Hi
Had a massive jam in bypass tray, it fed several sheets of card at once. I removed tray and found cog mount plate had bent with the force.
I straightened the plate and all cogs looked fine. Now...
Type: Posts; User: glenng
Hi
Had a massive jam in bypass tray, it fed several sheets of card at once. I removed tray and found cog mount plate had bent with the force.
I straightened the plate and all cogs looked fine. Now...
Hi everyone
I have a Work Centre 7245 that ‘Scan to Email’ has disappeared from the touch screen and ‘Scan to Mailbox’ is still on screen but won’t allow you to select a mail folder (greyed out)....
Hi all
Have a C450 ( similar to WC 72xx) with 009-360 error. I haven't a manual on this machine but I think it's a communication problem with yellow drum. Machine will output black & white but...
Anybody have or know where I can get a Xerox Document Centre C450 Service/parts manual?
Hi Phil
The router has been in use for a year no probs.
Have pinged and traced pinters address no problems.
Have cleaned and reseated DIMMS and also tried others from a parts machine - no result....
Thanks Phil B for your reply. NIC lights and IP address OK.
As for RAP - I have not yet reseated DIMMS or that fails replace ESS PWB!
Can you think of any other area I could look at. The machine...
Hi all
I have a Document Centre c450 ( similar to WC 72xx machines) was running fine until 116-324 error. I powered off/on but same error so did (6/stop/power save) reboot to clear print queue....
Thanks Caffeinekid,
I know Phil is correct but it's an old machine and he doesn't want to pay the $350+ for new belt. The belt has not done that many copies and seems OK other than the said...
THANKS PHIL! NEVER THOUGHT TO DO THAT...:p
Hi all
What cleaner do you use (strongest) on image belt for stubborn 'baked on' toner band.
I have used isopropyl alcohol that removed most of it but some remains.
What is the strongest you use...
Hi
Can't find 'Max Setup' tab in Diagnostic Mode. Need to calibrate ATC sensor.
It's Asia\Pacific model that is similar to 73xx models (I think)
Any clues?
cheers
Glenn
Thanks Scarecrow
Can you elaborate?
Hello all
Just calling on xerox techs field experience on life span of developer units in WC72xx machines. My experience is once they start pushing toner out and density drops on the near and far...
Thanks for reply Caffiene.
Yeah I guess I knew this to be the case. I thinking it's something to do with the charge coating on the drum, I was thinking along the lines of tweeking bias on pcr might...
Hi all
Hit me lump of 4x2...
Recently experimented in rebuilding some drums on Old Document Centre C450 (WorkCentre 7245)? using generic parts from China. The drums look the part but on testing...
Got it.... 6 + Energy Saver + Stop keys on start-up (clear print cache) I had tried it early on obviously not correctly.
all's well know
Thanks
Hi all
Desperate to get this dcc450 going again. Got a small pdf file stuck in processing. tried turning off all power, disconnecting from network. Can't promote or delete through centreware, can't...
Thank you Caffiene.
Your replies were very helpful. I was fairly confident that they were close to each other but wasn't 100% sure and i've seen some disasters using none oem toner in the past.
...
Hi all
Can anyone tell me if toner for a document centre C400 be used in a document centre C450?
The toners look and feel the same but does anyone know if it would effect the developer?
I realise...
Hi
Is there any way to sync serial numbers or reset HFSI counters on DC C400 WITHOUT PWS?? (through UI)
cheers
I have a jamming problem on a Document Centre C450. Paper concertinas at rego rollers. Happens from all trays.
Error log 008-164.
I have changed out registration roller clutch and both sensors...
Hi
Looked everywhere, can't find driver for mac os10.4 for xerox c450
Xerox no longer support.
Anyone out there that can point me in the right direction?
I have. They no longer support these machines and do not use the pws or have the tools for the c400.
Thanks Jake2o
Can you tell me how?
Thanks
Glenn
Hi
Anyone know if there is a way to reset 2nd BTR counter
without a PWS on a Xerox DC C400 (M24)?
cheers
Glenn