Yes luca already mentioned that. I think the downside was that it does not have all cyber security "certifications" one might need in special circumstances. Firmware was also a little different but...
Type: Posts; User: Gift
Yes luca already mentioned that. I think the downside was that it does not have all cyber security "certifications" one might need in special circumstances. Firmware was also a little different but...
Yeah that's true so maybe it's a toner issue after all, this can also happen with original ricoh prodicts every now and then. You can try and use toner from a different batch and run at least ~200...
LOL servicing an A1055 in a trailer must have been fun ;):p
Tray heater is probably a good idea, haven't ordered one in years but there weren't pricey back then.
;);)
Messing around the CCD assy is where the fun starts - my hint: a laserpointer or a tiny keychain LED light placed face down on the DF contact glass is a great help, did a challange once and...
OK, perhaps you need to go a little further. Can you tell a little about the enviroment of that machine? Room temp/humidity, AC or an exit door to the outside nearby?
In the past I had an issue...
You can try and bump all standby-related temps for the upper/lower fuser roller (1-107-001 onwards).
If you bump the target temps while using plain paper just bump ALL "plain" related SPs.
Also...
Guess the image is also not crispy-sharp if it comes closer to this corner.
Perhaps the scanner frame is slightly bent/warped.
You can try and pull the left corner up (or down) with a little bit...
Perhaps there's a little dustball between the drum and cleaning blade. Guess it should be fine after cleaning he drum/charge roller/blade + waste toner auger area.
If this line is only visible after...
That's weird - I'd probably start and restore all user/admin settings to factory default. And also clear the SP modes (no "clear all" of course) and format HDD.
In case onboard NIC/USB is disabled...
Would be interesting to know is scanner/printer sp show up in service menu.
A faulty system sd card might also be possible - not shure if the xxx2 series are using one or if they already stored...
How many pages did you print after changing the toner? I think you must perform at least 200 full bleed pages before the old toner is out of the system.
Besides I think this has been talked about...
Sweet, we're using a trolley chain-crane in our storage with these kind of slings ending up in one hook.
It's very handy so one person is able to pre-install a device without any helping hand.
LOL 99-03 is the code...
Let Me Google That
Yeah I know, I was referring to the filesize but that numbers indicate that this is is huge SD.
I'd probably considering some "cleaning" before starting the migration.
Not shure if vB might have...
Oops, I'd suggest to use Xampp to perform the update/migration/test - workflow on your local PC so you don't have to screw around with the live data and have a way better performanc/smoother...
Great news, I smell push notifications are coming ;);)
LOL seems like KM is checking out the forum ;););):p:p:p
Looks like HV fluctuations / issues - might be caused by worn out/defective consumables or bad contacts.
It's not unusual that one issue can sort of backfire over multiple colors since some HV...
Unfortunately there is no end of the story but the samples are good tu understand what bothers you.
I just comapred it with a used C450i (CY druma @60% remaining life) and depending on the...
lol - never noticed, we once had a c300i with overheating issues - we swapped the thermal conductive pad from the cooler with a qood quality grease and that helped, too.
Pretty weird that modern cpu's won't handle bluray playback / have DRM issues - perhaps AMD will do better...
Nice setup, I was into home cinema too and had a calibrated projector and optimized...
Yeah mkv worked fine fine for me for many years and was (and probably is) kind of a standard in the "warez" scene but also nice for legit stuff of course ;)
Do you keep and store all your rips?...
Can't really make a sense of a bitrate setting in any sort of playback-related topics but hey - who cares as long as it does the trick :D
I heard of DVD fab, seems more user friendly but I...
If you want to rip a bluray medium without re-encode there should be not bitrate option at all because the tool is suppose to rip the original stream without changing it.
Have you tried this tool...
Never give up the shield^^
I'm not familiar with JellyFin - guess the internal player might need some tweaks, not shure if there are advanced settings avalable.