Hi there!
This firmware is blocking teh whole engine when you put in the network-cable (in Germany), over WISE exist a link for bugfree (???!?) firmware, but we downgrade to version 2313A.
It´s...
Type: Posts; User: Zeldaman
Hi there!
This firmware is blocking teh whole engine when you put in the network-cable (in Germany), over WISE exist a link for bugfree (???!?) firmware, but we downgrade to version 2313A.
It´s...
Hi there!
Had a similar problem, the machine had lost Vendor/Product ID.
Go over WIM - Device Settings - Program/Change USB Device List
Greetings...
Hi there!
For the white lines i agree with the others: the PCDU´s are gone.
For the lift-problem: the lever D1962817 (modified No) is broken.
Greetings...
Hi there!
The thermopiles are IN the machine, not in the fuser! When there´s smudge on them the temperatureregulating goes "mad" and curled paper occurs.
Greetings...
PS: this an example of my...
Hi there!
Had similar problem, changed parts etc..., tokk the machine for 3 days in the workshop, where... nothing happens!
It was the poweroutlet of the customer - used another, no more fuser sc´s...
Hi there!
Had this problem only once, and it drived me crazy. Tried other paper etc... and in the end there was an amount of tonerdust on the thermopiles.Cleaned them, no more curling!!!...
Hi there!
In Germany there is kit for repairing the bottom plate of the DF. PN´s 1x D6069006 and 2x D6069007. The you need 2 screws M3 x 25.
The bulletin is RD296049
Greetings...
Hi there!
Normaly this noise comes a) from the fuser, or b) from wornout paperrollers in one of the cassettes.
Greetings...
Hi there!
Now the sh.. really hits the fan!!!:mad: 4 new Engines of this POS with the same errorcode.
Only solution is to change Part D3Q24-67009, socalled printbar lift shaft clutch. The gear...
Hi there!
GIFT is realy right, it oo reminds me at the first MP C2800. We´ve change the Dev-Untis like hell! But in all cases it were no tonerlumps but little plasicdebris fron the unit.
After 3...
Hi there!
Me in Germany too. No Firefox, no Safari, nothing!!!
Greetings...:confused:
Hi there!
Open the back Cover of the DF and Check the Screws of the DF-Hinges.
they often get loose.
Greetings…
Hi there!
We´ve got the same problem on various Metis, ghosting, smudges... and allways at black prints/copies.
1. thing we´ve changed the fuser - NG
2. played with the temparatures - NG
3....
Hi there!
We get Canon A3 Systems without boards. They come seperately after some weeks.:mad:
Greetings...
Hi there!
It exists an instruction from HP (:mad::mad::mad:) how to change the printhead. Better (and cheaper) way is to take a lot of gold leave, put it on the device and make a modern piece of art...
Hi there!
HP download-center = it´s for drivers, FW, etc....
Best is you enter the serialnumber of the device, then you get the latest FW.
Greetings...
Hi there!
One tip for this "coalmine": when there is no quality issue DON`T touch or remove the pcdu (don´t even take a sharp look at it), otherwise you have to change all the parts mentioned above....
Hi there!
Looks like you have a problem with the printhead! Check all the ffc´s = flexible flatband cable (they love it to install them in tons in the pagewide-series).
Remove the back cover and...
Hi there!
I think that the CIS in the ADF is gone (happens very often). I hope there´s warranty, so you can change the ADF. I can´t find any partsno. for the CIS.
Greetings...
Hi there!
Had this problem with the first 10 P77650 (same engine), allways airflow-errors, even after changing the assembly. Machine off/on alll OK.
After updating the firmware this problem was...
Hi there!
Original toner AND good paper!!!! When there is too much dust (chalk, etc...) in the paper this problem occurs much faster.
Customers with good paper allways reached the real end of fuser...
Hi there!
Welcome to the club! We´r 3 Ricoh-Techs in our shop and are waiting now for 2 weeks to get an access.
Greetings...:mad::mad::mad:
Hi there!
My 2 cents on the paper-exit-unit. Had this issue on some machines. The parts were not formed out properly at the manufacturer, but installed by RICOH.
After some times they get curved...
Hi there!
Sorry, ther are no spareparts for the ITB-unit only the whole unit. MPC 305 & 306/7 have different units.
Greetings...
Hi there!
Sorry, you can only order the complete DF-unit or the rolls, but no hinge!
Greetings...