Awesome thanks! I assume I can try this on most every model I clear. One more question, what is on the SD cards on the board? It looks like it may be firmware or maybe the address books?
Type: Posts; User: Sfish460
Awesome thanks! I assume I can try this on most every model I clear. One more question, what is on the SD cards on the board? It looks like it may be firmware or maybe the address books?
We have some overpriced monster that clears the drives and prints out a nifty sticker for the hard drive and certificate. I just don't know how to get the machine to run with the hard drive once it's...
gone...
I am in charge of clearing hard drives on returning machines. We have a customer that wants the hard drives wiped on several machines, but ALSO wants the ability to donate them to churches. I know...
I am in charge of clearing hard drives on returning machines. We have a customer that wants the hard drives wiped on several machines, but ALSO wants the ability to donate them to churches. I know...
Never opened. C-451 color copier. Make an offer, would need shipped freight I think. It's still on the skid.
Thanks
We have 1 left. I messaged one other person who was looking as well. I don't know the cost of them.
If you make an offer I can give it to my boss and see if its ok. I'm just a tech.
Are you still in need of one of these units? We have one new in box.
If you want to try a couple, then Amazon has some. If you want larger quantities, I would try Single service packet | Hardman | Double Bubble | variety pack because they sell all the types...
I use double bubble. I was introduced to it at TMI and my brother uses it at the military base. It's a two part epoxy that you mix and use. They have fast set, slow, clear, stuff that can be drilled...
Brand new in box. Comes with, well, I guess whatever comes in the box. It is undamaged and unopened. It was shipped to us in error and there is no tracking for us to return it. We don't deal with...
I have also seen more than one fixed by replacing the keyboard after firmware and other things failed. I am curious if unplugging the keyboard would fix it? Most of my customers never use it anyway....
Just and FYI, I just fixed a dead 2640 after it worked in customers office for a day. It turned out to be the MFP board that killed it. It was dead except for a red led on the main board.
We bought a hydraulic crusher which is impressive to watch and fun to find things to crush with. Oddly, the spindle center usually pops right out through the center of the platters. It also creates a...
Yes thank you for clarifying. I only started working with Kyocera around the past 4 years. I have no idea what the older ones use. The newer ones have an end of lease HDD erase that is Supposed to...
Either size will work and almost any size larger than 40Gb will work. Most all newer ones use the laptop 2.5 just for energy and size savings.
As long as you slide the toner release when you first unbox it, you should be good. I set up a bunch and did have one that fought me. It seems that if I drop the right side in just a hair sooner than...
Good luck there. Our Rep came in to help us with an error they created with some custom firmware. We needed to remove a data security kit (not as easy as I though) and they had great reset (not the...
Solved::
Short answer, firmware, long answer, yes we always do firmware, however, the machine fax firmware coming in, is higher than what sharp has on IDNC (shipped with 2.03, we downgraded to...
Hey all, I'm running into an issue today that I'm hoping someone has seen before. I set up a new MXB201D with an NB-11 and an FX12. I've set up anbout 12 of these in the past week without any issues....
Good morning all, once again I am charged with clearing the hard drive on a machine I have never seen before. This one is a Toshiba Estudio 3510C. Does anyone know if this machine has a hard drive...
Hello all.
Once again I am requesting hard drive information for machines I have never seen or worked on. Sharp, Kyocera and Minolta's are my normal thing. We are replacing a couple machines and...
Thanks Dave,
I'll say it, I'm a dick. I checked the bulletins but not the tech tips. I always ask techs when they call me for help, if they checked the Sharp site.
Well, kind of. The finisher was on machine A and it was jamming. Finisher has broken part in stapler so tech decides to disable stapler and order part. When machine is turned on, the machine feeds a...
Hi all, I am a Sharp and Minolta tech normally but I have been tasked with clearing a Ricoh 3025 before it is sent back to the leasing company. The machine has a fax on it but I can't see if there's...