Anyone have an opinion on using generic versus OEM staples. In particular I am talking about for the FS536 and FS536SD. I am thinking there MUST be a difference considering the price difference....
Type: Posts; User: copierlady
Anyone have an opinion on using generic versus OEM staples. In particular I am talking about for the FS536 and FS536SD. I am thinking there MUST be a difference considering the price difference....
OK Got it. Thank you.
Thank you. I will give it a shot.:D
Hi Guys,
Setting up a FS 536SD and the tray holder advanced up to far and is hitting the cover. Is there a way to make it go back down before I power up again? I know I have run into this before...
Looking to purchase some older machines Biz Hub C458. Any thoughts on these models? I have been away from the Konica Minolta for a while not really my choice even though that is where I started many...
Hey guys,
I have a Biz Hub c3850 with waste tank message. Customer has several machines and no new tank. I have tried to empty the tank, switch the tank from another machine with no results. Do the...
Hey guys,
I have a customer with a fleet of Biz Hub C3850 machines. As you know toner is getting hard to come by. Can you cheat the machines to give them the ability to swap toner cartridges? And...
I actually had a machine throw this code after I had cleaned it, and it was just out of M toner. Don't know why it didn't just tell me it was out of toner.:confused: Just an FYI for you guys. Had me...
Hey guys. Been a while. I have a customer with several Biz Hub c3350's. With the touch panels out. They do not want to spend the money to have the panels repaired. They made great copies before the...
Hey guys its been a while,
Does anyone know if the op panels on the Biz Hub C3850fs can be swapped with each other? I know Konica Minolta is not the friendliest machine for swiping electronics....
Thank you for your help. I vacuumed out the toner supply openings in the machine and the dv unit, and put it back together. It came ready. We shall see. Thanks again.
Thank you for your input. Gonna try this line for now. You are right all machines have there little "personalities" ! LOL I guess thats what keeps us in business.
Hey guys,
Have a e studio 4555c. Asking for black toner cartridge. I just replaced the black toner cartridge (OEM) and it ran about 500 copies and gave the message again.
I tried a cartridge from...
Hey guys,
Have not worked on Konica Minolta for a while but looking at some printers to buy. BIZ HUB 4750, 3850C, 3350C. Any thoughts on these machines? The tread seems to be going toward...
OK Guys think ill dive in to these . Sounds like a good fit for me. THANKS:cool:
Looking to pick up a load of copiers next week. Considering e studio 4555c. Any thoughts on this machine?
Thanks
Hey guys anyone have the part number for the exit sensor and harness for a Toshiba e studio 4520c? Old and brittle just fell apart in my hands! Don't want to rebuild the whole fuser unit if I don't...
Thank you for the help with the ca00 code on this copier. Finally got the code to go away but now the copies are too red. Is there an adjustment I can do in diagnostics mode? I know I sound like a...
See attached pictures. This is what happened while moving machine.
Hey guys working on a 4520 that was moved across country with the drums and toner removed from the unit for the move. In setting it up I am getting a CA00 code after 1-5 copies. When I remove the...
Hey guys Working on a 7501 that gives a j014 jam code from every drawer, but by pass runs all day. Any suggestions?
Hey guys,
Just got in some 7501's and getting ready to part out some mpc6000 units, Any valuable parts that fit both machines that I need to pull before scraping? One thing I am wondering about...
Thanks guys Problem solved. I just changed out the lamps, connectors, and sensor harness. Works great. Have a great week. Thanks again for your help.:cool:
Hey guys,
Picked up a fuser in the warehouse marked Gestetner mpc7500. Trying to install in a Richo mpc6000. I an getting an error saying fuser not set correctly. I thought these were compatible...
Thank you. For some reason I was thinking they changed that option.
Thanks again, Have a great week.