Your help is much appreciated thanks very much
Type: Posts; User: tekkie
Your help is much appreciated thanks very much
Hi Guys
I have a Bizhub c 4050 i that locks out on a regukar basis 3 or 4 times a day
Screen becomes inoperable no buttons work and the only way is to power off and back on then everything is ok...
Help appreciated
I have a CANON ISENSYS 728 cd that needs auto grad calibration and Colour Registration running due to colour misregistration
When I try to run autograd either quick adjust or...
Hi guys any help appreciated on my Bizhub c450i it freezes when coming out of sleep mode and wont boot
Any help or ideas would be helpful
Thanks for the helpful guidance this customer is not on service contract its a chargeable job so we have advised the customer it may need another call out charge for further investigation If I go...
Help appreciated on this bizhub c 224 very intermittent but regular jam
The code is 32-05 which indicates its a paper exit sensor PS3 code
Its intermittent I have run 150 at a time off no probs...
Hi any ideas welcome
I have a Canon irc adv 3520i that has blank screen and device dead apart from slep button constantly lit.
I have had this issue once before a couple of years ago but can not...
I am just back from holiday
Saw your advice I am back at work on Monday will let you know what I find
Thanks for the help
Hi guys any help or guidance would be appreciated .I have a Workcentre c405 that works fine on copy print and scan on every function until you attempt to do a 2 sided scan on both copy and scan to...
thanks for your advice I will give it a go
Hi Guys
I have an error code sc 990-00 on a Ricoh imc 530fb machine
I powered it on and off and its recovered and is working fine
The manual says its a marking error and lists 4 possible fixes...
Thanks very much for the help there yes i SWITCHED THAT OFF AND IT WORKED THANKS AGAIN
Thanks for the suggestion I am going back to site later today will let you know
I also had advice to set the paper weight media sensor up in service mode its a simple adjustment to set it up with...
Hi Guys help appreciate. I have a Bizhub c550 that has a strange fault .It is configured with the 2 extra cassettes at the bottom so it has 4 identical paper trays all using A4 plain paper.
The...
Hi Guys help with this old model appreciated
The Doc Feeder Works fine apart from the fact that the doc feeder rollers dont lift up to allow you to put the originals in to scan
If you lift the...
I will check these when I go back thanks
Hi Guys
I have a Versalink c405 that gives 092-032 error code and says replace cyan toner
I have a few of these machines that have done this in the past but seem to get it going by trying the...
Thanks for the help everyone I see the gear clutch assembly but somehow the 3 pin connector for the Df door open/close sensor had come off the board completely refitted it and it was fine ....
I am going back on Friday I will check this
Thanks for that
Hi guys help needed
Bizhub c224 with a DF 624.
Its feeding fine but when it gets a jam the jam won't reset and the pick up rollers don't reset back to up position.
The only way to reset the jam is...
I have a customer complains of jams 2nd time now
When i arrive its only a couple of jams either tray 1 or tray 3 but always the same code 30-03 which indicates jam in 2nd transfer area
I have...
It was THE main controller board
Cheers
I have a Canon iradv C 3525 The mc switches on and cycles but control panel is all black and energy save button is lit
I am returning on Monday with low voltage power supply I just wondered if any...
I have ricoh imc 300 that prints off an activity report periodically
How can i disable this or turn it off
Hi GUYS i HAVE A Ricoh IMC 300 can anyone please advise where you can turn off the activity report print that prints off automatically periodically