Search:

Hellow, so you removed the cleaning roller in every pcu ?

What's the lifetime for those units then ?

MPC2525/3000/3500/4500 and MPC4000/5000 ?

Thx !

When i select two sided copies with two staples, it throws out the first set and it pops out Jam code 020 .
Machine is working perfect when you dont select stapling, normal duplex is working fine...

What was the solution ? i have the same problem ! Thx !

Hello ,

we have the same problem ! I'm still searching for the reason . Nothing has changed in the firmware ...

Sometimes the lifetime of the developer has reached out of 240 K . I think...

Hello everybody , is the problem solved now ? i have the same problem .

thx

I have same problem as above , somebody any ideas ?already replaced : drum , cl blade , cl brush , developer unit , developer (+7) transfert belt and blade ...

Update,
i've 2 machines with the same problem in one week , i replaced the both sensors with new ones and it seems to be ok for about 2 months now.

When i open the old switches , there is a lot...

Hello ,

I have a mpc 2500 with following problem : several times in a day the machine jams just out of the fusing , at entering the bridge unit . (+- 15 times a day )

The machine logged...

Hellow , does anybody know how to place the gears (and motors) on the right way in the drive unit ? They have both an dot on the face but there nothing in the manual how to put this right ?
A...

Hellow, i think that the problem is in the stapler unit , bad contact or otherwise in the cable that drives the stapler unit , this is the fat wire who also come out when you opens the finisher and...