I wonder, does this poll show what brands are (A) most popular, (B) most problematic since we are here to find help, (C) the companies with the worst support system, or (D) both B&C.
Type: Posts; User: Frostwolf
I wonder, does this poll show what brands are (A) most popular, (B) most problematic since we are here to find help, (C) the companies with the worst support system, or (D) both B&C.
The wireless unit Konica Minolta is talking about a Silex SX-600 LINK
I have been using this one lately. LINK So far so good, almost small enough to hide in every machine.
The only way I could see this working was to have the network adapter go to a primary network, then a usb-network print adapter to provide printing from second network.
Like this unit here
Or if...
Never had to reset the c353. Try wireshark. The easiest way is to use a usb to ethernet adapter on a laptop, then bridge the two network adapters together. About 15~20 dollar setup that can save you...
I've seen this a long while back before A9 Firmware. I reported the problem to KMBS, but they wouldn't look into it. This can be seen with wireshark when the first attempt to get the hostname...
I'll add each time I had the trouble the email was using ssl or tls. I wiresharked the last one, and it just seem to stop trying during authentication.
Just wanted to let people know,
Since K2 (maybe even J6-J8) firmware updates I've had 4- or 5 black & white e series(224e to 554e), that will not scan to email no matter what you do, until you...
Update:
As of now the machine has run nearly a month with this reset-able fuse in place of the 2.3 ICP1.
Mouser Link
Check for swollen caps on power supply, I've seen a couple of Dialta 3510's and bizhub 350's with caps swelled up. Should be able to see them without taking it out of the machine.
Good Luck
This is one of those wait and see problems. I've installed this 1210L200SLYR fuse and its currently running again. I have another board ready to try if this one is to low amperage with another fuse....
I haven't been able to confirm where the 5v comes from the Power supply only has 24v. Does the 5v originate in the machine or does the PDB create it from the 24v?
I can't find any ICP's that are...
I have an FD-503 that keeps blowing the IPC1 on PDB (Punch Drive Board).
Only thing on Konica Minolta site has is to replace the PDB board & confirm sensors PS1, PS5, & PS6, and troubleshooting...
I would make sure you are using the PCL driver and not universal. See if the job is being deleted on the copier log, or confirm the print jobs are arriving at the machine via Wireshark.
Ee had a c364e that wouldn't boot up most of the time and was stuck on the second bookmark as you called it. The SSD was bad, and we had to have tech support approve our order.
We stop using the ESP, the older models were passing electrical noise into the Fax lines when connected to C353 series.
We went to SmartPower filters here ......
Did you try typing the hostname all caps? You could also try putting local behind the hostname like this hostname.localIs DNS on local network or outside such as ISP?
I would have to believe no to GDI, but an HP PCL(such as 5si) driver with the IC-209 (PCL option) should give basic printing.
We recently had this same issue, and the problem in my case was that KMBS was sending us the wrong LK version for the machine. I don't have the chart that shows witch version is compatible with which...
I can't resist,
You mean to tell me you have 601/751's that don't dump.
My normal checks are Bias on dev unit, Drum voltage, drum ground, and T&S mylars. I also have had a T&S unit cause...
I have seen this issue with intermittent error 107.
Next time someone see this, please try turning off "DNS Domain Name Settings" and clear all the field entries (if disable but domain left it...
12x18 shows no repeating patterns. All the calibrations were done by myself, and it appeared the 1st tech did his adjustments correctly. All developer units and developer were new including the dev...
A tech changed out all 4 drums (DU-104), dev units and developer, charge assy's and 250k pm. Now we have magenta spots showing up on the copies, no pattern, random about 2 to 5 per page.
We have...
I have a 1128MFP also running out of memory on reception. Manual says U19000 is out of memory. We have the 512mb expansion memory in the machine. And I can duplicate the problem on on our office...
I don't know the part number but you can order the firmware from Konica Minolta with the firmware already on the card if you had to.
I need to demonstrate ftp printing on a bizhub 601/751 and Bizhub 421/501. I need to do this ASAP.
I can do it on bizhub 200 series no problem, but I cannot find the username and password to print...