Is there any grease/fingerprints on the sleeve?
Sent from my SM-N910P using Tapatalk
Type: Posts; User: prntrfxr
Is there any grease/fingerprints on the sleeve?
Sent from my SM-N910P using Tapatalk
Using a used P4014 formatter on a P4015 will downgrade the machine to P4014 (slower). Don't do it. If you do, and it does, as far as I know, there is no fix for it.
I know this probably doesn't relate to your problem because yours is feeding, but I had one 4700 that recognized the duplex unit, had a good ETB, but wouldn't duplex at all. Turned out to be the...
Offering Clearance Pricing:
While it lasts. Call 1 800-633-6626 for pricing. Ask for Steve Hilley
ITEM ITMDESC
DUNTW0617RSZZ FUSER ASSY. (SHARP ARM257/317) ...
Did you perform a half page test to rule out the cartridge?
Did you update firmware for the printer?
Does it happen only on that paper or does it occur with other types?
I buy a Wiha set (HP/Toolkit from TSA world-www.tsaworld.com) that uses Drive-loc blades. It comes in a green canvas pouch with velcro closure. All of the blades are double ended. #2 and #1 Phillips,...
Communication issue between the Laser Scanner and the DC Controller. Service manual says:
54.2100 Beam detect (BD) error If the error persists, replace the DC controller.
If the error persists,...
Go to the I/0 menu and insert the IP. Although it pretty much sets itself up when you plug it in. You can perform diagnostic tests from there too, but you will need the service manual to understand...
Might have to contact HP tech support on that one. Did you read the "readme" file prior to installing firmware? Did it say anything about removing options prior to install? Changing DC Controller and...
Thanks guys. I will let him know.
A tech buddy of mine has a problem with a Sharp AL-1655CS. I am not familiar with Sharps. The display for some reason says "UPGRADE SERVER" on the display (He does not know if it was another tech at...
There are no physical switches on HP to reset the printer. Likely it is the engine test button and is used by technicians to diagnose problems.
Putting any toner that is substandard or even 3rd...
I reread your original post. If the labels are not skewing but the image is, maybe non standard or a bad batch of labels. Tried them in tray 1 just to see if you still have the skewing?
It will probably be either the Laser Scanner or the ECU. On a small machine like that it will probably cost more than replacing the machine if you buy OEM parts. Even on refurbished, by the time you...
1) Rollers Good?
2) Torque Limiter Good?
3) Solenoid may stick but that would give you multi-feeding. Is that what is happening? Is it feeding more than one sheet at a time? Clean off the foam pad...
More than 90% of the time it's the pad on the solenoid wearing out and causing the flapper to stick. Remove the pad and put new felt (not too thick).
Check the bushing hasn't broken or come...
Need a service manual for Canon Advanced IR C2030 to repair in shop test machine. I would like to start with a manual before posting my problem. You guys know I help people.
I may have missed something when scanning the previous posts, but you're saying the problem only occurs when printing from tray 1? Did you replace tray 2? It is the part that is doing the actual...
I guess my message wasn't clear enough and for that I apologize. I was referring to the way techs sometimes check a problem by throwing a board in from another machine.
That being said, it is...
Used formatters that have already had their personalities "burned in" on the formatter will downgrade any printer you put them in. Unlike the 4240/4250/4350 printers, there isn't a known way of...
These machines are notorious for having Formatter issues and considering what you have already tried I would lean strongly in that direction.
The fusers not rotating by hand is not unusual. Fusers...
These may sound like dumb questions, but we have no way of knowing whether or not you tried it:
1.) Did you perform the CPR calibration 3 times from the Print Quality menu?
2.) Did you replace...
Hmmm...been doing this job for a long time. I think the problem is everyone is thinking of the 41.3 error which is paper size error. If the paper doesn't clear the sensors at the right time it can...
DO NOT install a used P401x/P4515 formatter in anything you care about. If the personality has not been blanked out and made to default (aka doesn't know what it is yet) it will downgrade the machine...
Dish detergents have ammonia, so be careful.
Ammonia and bleach make a toxic gas. Very dangerous.