Search:

Simulation 21-1 is for maintenance counter and needs to be changed to 999.
This will get rid of maintenance needed messages.
Also if that does not work i have found that after changing all drums...

My experience with that code on three different boxes of mx5141s is that the scanner ccd stalls because of the anti fraud feature in those models.
In every case I was able to duplicate the exact...

I just battled with the very same issue the customer has a win8-upgraded to win10 and scan to smb folder stopped working.
I found that creating a new user with a password with admin rights and...

glimmer1980 did some one help you resolve your load paper issue and what was the fix???????

I also agree these fusers are junk!!!! Even with the updates its a 50/50 chance it will repeat with the L4-16.
These fusers fail so much we have a separate box in parts room just for these issues in...

Good afternoon patrons,
I have an necIT3640 with an issue of the "document on glass" message when the original is inserted into the document feeder.
I have changed the photo sensor and the magnet...

[QUOTE=francisco;484360]i have win 10 and today whith a mpc 2500 works fine.

I have this very same situation with a ricoh mpc2500 that will not smb folder scan no matter what i do.
Could you...

I have had many of these units fail in color registration. The bulletin thats in reference is a good one and if you follow it word for word you can manually get the colors lined up. Once you line...

I have the latest ( ARS2_MAIN_0500A2) firmware already loaded and the problem is still happening with load paper two to three times a day and I did confirm that. Do I have to back firmware to the...

I also have a mx3640 with exact same issue and the trays get opened and closed to print out and then it goes away.
I have replaced said sensors with no change and am currently out of options to...

I had to swap the mfp and nvram from a working machine in our warehouse do to failure.
The result was a message that said License error management occurred and the machine seems to work other than...

I have had customers scanning documents to folder or email for later printing. The lines of any color were the scan glass had something on it for the back side and they would save file with line...

I agree with the post talking about the charge terminal with exception to it being the terminal I have had the charge roller unit pop out of its tabs and cause a no charge condition which in return...

The message listed above in this post is word for word when the fax button is depressed.
I have tried a fax board with no luck and the firmware is up to date and reinstalled also the machine has...

I would start by checking the scan size settings on the copier {What dpi is it set for?}[a lower dpi setting will allow quicker data transfer cause file size is less.] Are they trying to scan in...

I have an update the wd plotter did reset after I freed up the carriage assy. that was jammed on the cleaner insert.
But that being said the machine still kicks up a "B" jam when the roll runs out...

I have a mp cw2200sp with a B jam after the roll runs out and machine will not reset the condition after resetting the door and it cycles like it is gonna reset and never resets.
It only happens...

I have tried to boot up with hdd unplugged and with it plugged in neither works with new board is there a flash card set up dim for this model cause the old board does boot up with hdd unplugged and...

They are white but just fyi I have no way to do firmware machine will not come up the panel stays black and speaker crackles no boot.
Old board when put back comes up but says please wait and bar...

There is an orange flash port I swapped over and nvram connection is black not sure what your asking?

I have changed a mfp board on a phaser 3635 for a reboot issue after changing the hdd. When I change the mfp board the machine does not even come up at all it just is a dead machine.
Is there a...

I also have a 7020 with dv issues im not sure the correct procedure for initial was done do to it is old machine and we do not have the proper documentation to access service mode and initialize it...

The copier is actually an NECIT45c6 when nec closed shop in 2013 there firmware files no longer were monitored and updated I dont believe I have access to konica minolta firware and nec does not post...

I believe firmware is up too date what version are you talking about that has what you described in your post "bizhub secure installed".

I have a c452 with color reg. failing after a couple of days and then I do stabilization and it comes back.
Units that were replaced were c,m,y, image units.
Cleaned the id sensor array and...