Search:

Agree.

BVulgaris: Do you think your tech/s are not the most switched on of fellows ?

If a digital machine is skewing by 1mm and it's not satisfactory you really need to take the next step up -...

I work at a KM opco and have done two master certifications as you described but would by no means call myself a master of anything.
As the almighty Socrates said : 'The only thing that I know is...

Easy prntrfxr, although you could be correct in this instance !!!!

If I was asking people to buy my top quality compatible cartridges this week's special being buy three get one free excluding...

Had to share this ridiculous PM just before I deleted it, I think this user has deleted their account now but what a dick hopefully they'll come back and read it sometime :



My reply :

You...

Don't forget to reload controller firmware first before replacing anything (which in most cases will work).

I would second that, well done that man !!!

Check that the actuator spring on the fuser speed control sensor has the correct tension, i.e. isn't slack or sitting out of position. Have seen something similar caused by spring tension being...

This is a jitter problem with heavy stock hitting the bottom of the transfer belt causing the mark - a special rom was brought out for the 6500/5500 which racked the CMY transfer rollers out when...

I'm guessing more likely 1. since the driver is part of the OS and it's only a ppd which is effectively a text file which describes printer capability.

Unless the ppd is in the wrong place and...

This was an old C500 problem as well to which the solution was a new rom for the engine. Is your firmware up to date and is the machine operating in the Q-zone regarding temperature and humidity ?

Which brand and weight of paper is your customer using Brian ?

I have a customer using Antalis Multitude and they have no problems with separation or drum claw jams at all.

get the message although I thought you might like the benefit of someone having worked on hundreds of 7272's and not being able to find a solution but when you find out what it is be sure to let KM...

This is an old old problem which hasn't really been resolved by KM, I think it's because of recirculating toner but all sorts of workarounds have been tried to sort it like inserting conductor...

ker-chingggg !!! $$$$$

C5500 is slower and cheaper than C6500 and more of an entry level box.
C6500 is a faster machine with more optional online finishing and paper input capacity which is a...

The 8022 is similar to (but not the same as) a c350 and doesn't come with any print controller whatsoever. It needs a Fiery RIP to print.
As it's not a current model you would probably find it...

Check the waste toner box fella, could be the toner's not getting transported away and building up in the IU.
What about the erase leds as well, maybe they need a wee clean ?

Getting blank prints now by the look of things ........... :D

It's the sensor below the cover to the right of the optics looking at the top of the machine, it will be covered in toner most likely.

Sounds as though your customer is using particularly cheap / poor quality paper loaded the wrong way up.
Have had the same issue with Impega Budget paper.

supersonic

if you start downloading the firmawre and the fiery HDD can't be formatted then it's fubar, otherwise it should be OK.
Also if the fiery HDD format takes longer than a few minutes it's a sign the...

(IP) xxx.xxx.xxx.xxx/nic/speed
in web browser

I think this only works in the Konica RIPs, don't think there is a way to do it with the generic Minolta network cards.

I have been wrong...

With all due respect, in addition to the previous comments:

It would be a colour C350 if it were to have a Fiery and it's only older Konica products that have a PostScript chip fitted to the NIC....

Duuuuuuuuuuuuuuuuuuuuuuhhhhhhhh.....................
I's too clever to be a tech..........I sells copiers.......they aer the big things what paper go in...................

:D

yummy