Search:

Type: Posts; User: totoro

Page 1 of 20 1 2 3 4

Search: Search took 0.01 seconds.

  1. Replies
    22
    Views
    6,996

    Re: mp 6503 with j003 issue

    J003 problem happened again. put in a new tandem right side tray. Hope this fixes it.
  2. Replies
    9
    Views
    3,352

    [Error Code] Re: Ricoh pro906ex SC990 code

    update to latest firmware or reflash if already there
  3. Re: Ricoh MPC 4502 and MPC 5503 long time for working

    if it's taking a long time to copy and print , I would probably look at the HDDs.
  4. Replies
    22
    Views
    6,996

    Re: mp 6503 with j003 issue

    I went out there yesterday and found that when i manually lifted the tray the rear right side of tray was about 2mm lower than the front. i shimmed the rear as I could find nothing wrong with the...
  5. Replies
    22
    Views
    6,996

    Re: mp 6503 with j003 issue

    I did not change just the sep roller. I put in a new feed unit .
  6. Replies
    22
    Views
    6,996

    Re: mp 6503 with j003 issue

    I have watched customer load paper in the tray and they do it better than I do. It has to be some mechanical problem that i'm missing, but thanx for the imput.
  7. Replies
    22
    Views
    6,996

    Re: mp 6503 with j003 issue

    will be back there soon and let you know. thanx
  8. Replies
    22
    Views
    6,996

    Re: mp 6503 with j003 issue

    Paper in tray is being loaded correctly. Paper feed unit was new. There is an adj for sep roller pressure that I have never used. I may try that. could this be a problem with the try lift? Tray seems...
  9. Replies
    22
    Views
    6,996

    Re: mp 6503 with j003 issue

    no paper behind tray, end and side fences look fine. Paper is loaded good. I thought this model used motors for feeding , not clutches. I know that there is a feed motor on the feed unit itself, but...
  10. Replies
    22
    Views
    6,996

    mp 6503 with j003 issue

    Hey guys, I have a mp6503 with an intermittent J003 problem. No toner dropping from dev unit and meter at 700k. Have gone in and switched T1 and T2 feed units as customer says they can run their jobs...
  11. Replies
    11
    Views
    3,723

    Re: aficio 3045 toner add message

    is the toner bottle turning?
  12. Re: Lanier MP CW2200 not printing from brand new Windows 10 Pro 64 bit PC's

    Is the firmware up to date? Wasn't there something about setting the paper type to the one like " no display " ? I thought it was a glitch in the 2200 that they fixed in the 2201.
  13. Replies
    4
    Views
    1,777

    Re: waste toner bottle setting erro ricoh c6501

    so you changed the waste toner bottle. did you check the sensor?
  14. Replies
    7
    Views
    1,647

    [Misc] Re: Ricoh 907 Blank Pages

    Let's go back to basics here. What are your values for vsg and vsp? Is there toner\developer in the developer unit. Do you get an image on the drum doing a panic stop. So many varibles.
  15. Replies
    3
    Views
    451

    Re: c410dn Cyan Toner Pump Won't Turn

    If you've swapped the connectors and then it works ; I would go for the board that's sending the on signal.
  16. Replies
    15
    Views
    8,131

    Re: Preset Stamps on MPC4500

    That comment was totally uncalled for. This is a forum for techs. A trained tech would understand the instructions given. If you don"t understand then you are either an end user or an untrained tech....
  17. Replies
    4
    Views
    1,734

    Re: MP301 EXJS firmware updating

    Have you updated to the most current print driver? I have had sc899 after updating firmware and resolved it by updating to newest driver.
  18. Thread: SCAN TO FOLDER

    by totoro
    Replies
    4
    Views
    2,849

    Re: SCAN TO FOLDER

    Check your dns. Anytime I've had issues with computer names it's been a dns issue.
  19. Replies
    15
    Views
    18,653

    Re: Cant reset cleaning unit message

    Someone correct me if i'm wrong, but don't the lube bars in the pcu cleaning units have end detection tabs, and sensors on them so that you can't just reset the counters to clear the message? I think...
  20. Replies
    1
    Views
    1,641

    [Jamming] Re: Constant random jams displaying j098

    Have you followed the J098 troubleshooting steps in the service manual?
  21. Re: Pro 1357 LCIT 5030 strange behavior... Shows A3 in tray 4

    Have you checked in the paper tray settings to see if someone has set the size to A3 manually ? I don't know if that's possible, but I would check that first.
  22. Replies
    7
    Views
    4,094

    Re: colour registration problem mp c8002

    If you have the manual : why are you looking up color registration problems instead of looking up sc 285-00 ? Looking up the sc code will give you much more specific causes and solutions.
  23. Re: My customer dropped a bomb on me...Purchased a C5200s and wants me to service it!

    I've only worked on a couple of these and it is a completely different beast if you've only worked on the C5502s. It is a " light " production model that should have come with a Fiery controller (...
  24. Replies
    6
    Views
    4,282

    Re: MP C6004ex Scan to Multi Page TIFF

    I only work with the classic screens, but I know you can do it from the new scanner screens also. From the classic scanner screen Press [Send File Type / Name] and you can choose multi page tiff and...
  25. Replies
    38
    Views
    10,487

    Re: PRINTING PROBLEM (MP 3055sp)

    You are entirely correct. I must have fat fingered 001 instead of 011. I hope no one followed that post. 001 is a very last resort. Thanks for correcting my mistake.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4